Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Finishing a Sponge?

Posts

Finishing a Sponge?

#1

Finishing a Sponge?

John Luke

Not really finishing a sponge but spalted western maple which seems like trying to finish a kitchen sponge.

Have some drawer fronts made of spalted western maple that I'm finishing with sprayed on Deft satin lacquer and the spalted maple really soaks up the finish.

I'm now on the fourth coat ( light sanding with 400g between coats) and it looks like it will be at least two more coats to start getting a discernable finish.

Any tips anyone?

Re: Finishing a Sponge?

#2

Re: Finishing a Sponge?

John Lucas

Nope, just more coats. Sometimes it helps to take a day and let it dry. It seems like it dries pretty fast but I find if I let it sit for a day it doesn't take quite as many coats. I usually thin the first couple of coats which helps it penetrate better. But that's mostly because I'm a woodturner and will often be turning through it so it needs to be solid. After that it's a matter of building the finish. sometimes using sanding slurry kind of finish goes faster on this.

Re: Finishing a Sponge?

#3

Re: Finishing a Sponge?

waroland

Just keep them coats a-coming.

Re: Finishing a Sponge?

#4

Re: Finishing a Sponge?

John Luke

Thanks, finished the drawers today.

Eight coats of lacquer gives and even finish with no dull areas.