Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Platform build

Posts

Platform build

#1

Platform build

mildbill

I'm building a base platform for my koi pond filter and was wondering how strong to build it. It'll be about 5'x10' and fastened to the side of our shed on one side(the long side). The opposite side will be on the ground on top off bricks. When everything is up an running with the filter full and pumps and all, it will be somewhere around a ton. I don't want cement because I may move to another location sometime in the future. Would every 16" be OK or should I go 12" on center. Would 2x8'x10s be OK run long ways or sould they be run on the short length.

Thanks, Bill

Re: Platform build

#2

easy

Bill Tindall, E.TN.

A ton is a piddly amount to hold up. Anything you do will hold it up. Run short ways I think 2x4's would hold it up. I have put a ton routinely on two saw horses.

House flooring is designed to carry 50 pounds per sq ft. and be relatively stiff to boot. You are proposing building to house floor standards so your proposal will carry 50 x 5 x 10 pounds and have a huge margin of safety and stiffness.

Were it mine I would build a frame from pressure treated yellow pine 2 x 6's with the "joists" run short ways and bolt it to the building.

More data- in my lumber racks the 2 x 4's are on 4' spans and 3 of them hold two tons of lumber handily.

Re: Platform build

#3

Re: easy

mildbill

The vast majority of the weight will be in a 4' diameter to one end.