Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Blade Changing on Delta 22-540 Planer

Posts

Blade Changing on Delta 22-540 Planer

#1

Blade Changing on Delta 22-540 Planer

Ralph Lipeles

I have to change the blades on my delta 22-540 surface planer. I removed the old ones and saw that they are sharpened on both sides. The side that had been down looks like it is sharp and has never been used. so all I have to do is flip them. My planer has springs underneath the blade to push the blade up against the setting fixture. However, I do not have a fixture. Can I install the blades without a fixture?

Re: Blade Changing on Delta 22-540 Planer

#2

Re: Blade Changing on Delta 22-540 Planer

Chuck Hans

I have the same planer and I have never tried changing the blades without the height gauge that came with the planer. the gauge pushes the blade down slightly as it rests on the cutter head. I would not try just flipping them without the gauge.

Re: Blade Changing on Delta 22-540 Planer

#3

Re: Blade Changing on Delta 22-540 Planer

Bruce, a MN Galoot

I have that same one, too, and I don't know how you would set the blade height without the jig. Cheesy as it is, it works really well. I'll lend you mine if you return it.

Re: Blade Changing on Delta 22-540 Planer

#4

Re: Blade Changing on Delta 22-540 Planer

james runchey

I bought a gadget called Planer Pal, (I think that was the name), and it works very well. It consists of two cubes about an inch or so with magnets embedded. makes changing blades a breeze.

Re: Blade Changing on Delta 22-540 Planer

#5

Re: Blade Changing on Delta 22-540 Planer

Lars Parrington

have you seen a picture of the stock jig? no reason you couldn't make one out of wood in about 30 seconds.

Re: Blade Changing on Delta 22-540 Planer

#6

Plus it's still available

Bruce, a MN Galoot

from several different places on the intertubes for about $8 plus shipping.