Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Cut off wheel in portable

Posts

Cut off wheel in portable

#1

Cut off wheel in portable

Gary Smyth

What am I facing if I put a 7" cutoff wheel in a 7 1/4" portable saw? I need to cut some slotted steel. I need a dozen cuts. I'm concerned about destroying the innards of the saw or setting something on fire. I hate to spend money for a cheap tool and worse, hate to spend over $100 for a decent cut off tool for such a small amount of work.

Re: Cut off wheel in portable

#2

Re: Cut off wheel in portable

Dick Coers

Harbor Freight will be your friend. The perfect throw away tool for $32 minus a 20% off coupon. On a good saw, you will probably have steel particles stuck to the saw shroud, but can't think of other bad stuff right now.

Re: Cut off wheel in portable

#3

Re: Cut off wheel in portable

Thomas S Stockton

Harbor freight also sells a carbide tipped blade made for cutting steel about $20 way nicer to use than the abrasive ones. I've used both in my saw haven't had any problems but my skill saw leaves a pretty rough life and gets used for things I would not use other shop tools on.

Tom

Re: Cut off wheel in portable

#4

Re: Cut off wheel in portable

Tom du

Do you have a recip/Sawzall? Blades are cheap but don't get the cheap ones.

Do you have an angle grinder? My Milwaukee 4" using cut off discs from Pferd has done so much work for me. The grinder is probably close to 20 years old. New plug, clean the armature and clean the brushes.

Go to goodwill/thrift store and buy a cheapy. Reuse is better than getting a new one

Tom

Re: Cut off wheel in portable

#6

I have done it for many years.

Bill Tindall, E.TN.

How else would you cut rebar? If you get into serious plate cutting the zirconium wheels last much longer. Sheet metal will leave you deaf but it saws easily.

Re: Cut off wheel in portable

#7

Re: Cut off wheel in portable

GolfSteve in Calgary

I've done it. The abrasive wheels leave a horrible mess that requires some meticulous cleaning of the saw if you don't want to track abrasive onto your good wood in the future. Check the rpm ratings of both the blade and the saw.

Re: Cut off wheel in portable

#8

Re: Cut off wheel in portable

2B6

I picked up some "heavy metal" recip' blades at Lowes. Dark blue in color & man do they cut!

Re: Cut off wheel in portable

#9

Jack Guzman from Maine

Re: Cut off wheel in portable

Jack Guzman from Maine

I do it alot and I've never damaged a skilsaw. I find the cutoff blades wear down too quick however.When I'm cutting thin steel as in steel roofing I turn a regular wood cutting blade around. The noise can damage your hearing so wear ear protection. I've seen blades made just for cutting steel ,some with diamond and some with small carbide teeth,but I haven't tried one yet.---Jack

Re: Cut off wheel in portable

#10

Re: Cut off wheel in portable

james runchey

A four and a half inch angle grinder with an eighth inch abrasive wheel cuts like a dream. Harbor Freight has them on sale for $15. Mine works as well as my 100$ Milwaukee grinder. I don't use the HF wheels, I use DeWalt.