Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Question for interior painters OT

Posts

Question for interior painters OT

#1

Question for interior painters OT

Barry Irby

Been buying, fixing up and either flipping or renting some houses recently. Most of them are twenty to forty years old and the interiors reflect ear and tear and what happens when amateurs are left unsupervised. Some very vivid colors, Various levels of gloss, and some amazingly bad patches. We add to the problems by making extraordinarily good repairs and patches :D . The problem comes when we paint. We have pros come in a spray the interior. While the coverage is good, the various sheens from whatever is underneath tends to show up in the final coat. So, the question is, is there some sort of primer (whatever) we could spray or roll over everything to even it out?

I thought about using the "knock down" drywall finish. I know its popular in some parts of the country, but not so much around here. Anybody got experience applying it? (Part of the reason for doing this whole thing is to provide work for my unemployed son and me. So anything that you can "do-it-yourself" might be OK)

Re: Question for interior painters OT

#2

JL

Re: Question for interior painters OT

JL

Kilz is your friend. I'd probably stick with the "oil based" as opposed to the latex.

I've used it over many a stain including Sharpie marks and the like. You usually get a reasonable coat. I usually have them color it to about 1/3-1/2 of of what my final color might be for my latex coat.

Re: Question for interior painters OT

#3

Jesper, Denmark

Re: Two coats.......


Re: Question for interior painters OT

#4

Bart Goldberg

Agree - Kilz is your best friend


Re: Question for interior painters OT

#5

David Barnett

I vote for BIN over Kilz anyday


Re: Question for interior painters OT

#6

Re: I vote for BIN over Kilz anyday

Barry Irby

I have used both Bin and Kilz. We tried Bin in a house that had terrible Dog pee smell. Bought about $200 worth and painted the floors. Looked good for a day or two, then the brown spots began to reappear. Apparently there was enough ammonia in the pee to pop the Bin off the floor. This was after treating the floor with Urine Destroyer and bleach and cleaning the plywood over and over with a carpet cleaner. At that point we gave up and cut four hundred square feet of plywood up and removed it. Replaced that part and painted the entire floor with Kilz. Then replaced the Sheetrock up about a foot and the ducts under the floor and part of the underfloor insulation.

But that was a different case, that was odor, this question is about evening out the texture.