Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Preferences for a CMS blade that won't cost $$$$$

Posts

Preferences for a CMS blade that won't cost $$$$$

#1

JL

Preferences for a CMS blade that won't cost $$$$$

JL

I need to get a 10" CMS blade for the Playhouse. Inexpensive is good - but I don't want too cheap. I can pick up blades at Rockler or Woodcraft when I go down to the city or I can order online or get from Home Despot or Lowes.

The crosscutting mostly involves "white wood" 1 x 4, 2 x 4 and various types of baseboard, window and door trim or crown molding. I'm thinking 60 tooth.

Re: Preferences for a CMS blade that won't cost $$$$$

#2

Re: Preferences for a CMS blade that won't cost $$

Jason Waters

I think 60 is appropriate for a 10" saw to perform nice clean cuts. Keep a cheap blade for cutting pressure treat and rough stuff. I'd avoid a thin kerf blade for this kind of work.

I have several DeWalt (when they were made in the UK) blades for my 12" I have had sharpened and have been happy with their performance. Not sure where they are made today.

I'd probably pick a Freud or a CMT or other name brand quality blade. I've stayed away from the store brand blades. Look for clearance blades (I got my DeWalt blades from the DeWalt service center on clearance), or order online.

I have 2 Forrest blades for my tablesaw and they are really good, though expensive. Got them at a Woodworking show.

Re: Preferences for a CMS blade that won't cost $$$$$

#3

Very happy with Irwin 


Re: Preferences for a CMS blade that won't cost $$$$$

#4

Very happy with Freud 40T