Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

(Message Deleted by Poster)

Posts

(Message Deleted by Poster)

#1

David Barnett

(Message Deleted by Poster)


Re: (Message Deleted by Poster)

#2

Ellis Walentine

Great resource. Thanks.

Ellis Walentine

Since I haven't been keeping up with the latest LED developments, can anyone tell me if they've figured out how to mimic the color temperature of a tungsten filament? And are low-voltage dimmers affordable?

Ellis

Re: (Message Deleted by Poster)

#3

What is your experience with

Gary Smyth

driver hum? At 5000K and 6500K, "white" lamps, a typical month done installation develops hum that in my examples, gets worse over time. The only solution thus far has been to isolate the driver away from everything electrical around it which defeats the value of space savings, as now there are wires spread out in two locations, or replacing the driver which has turned out to be a temporary solution. This started with IKEA strips but has continued with Utilitech and finally Luxstrip. Any problems with what you are using? The LEDs can get pricey and I've pretty much decided to wait experimenting until they can get the problem resolved.

Re: (Message Deleted by Poster)

#4

David Barnett

(Message Deleted by Poster)


Re: (Message Deleted by Poster)

#5

I never considered too much. And another

Gary Smyth

Would a downstream voltage regulator set for a peak of 12v stop the problem? I'm no engineer and can only sometimes find the correct button to push to even turn on a light, but if what you term boost is the problem I'm thinking that that might work. If so I'm wondering how much additional one needs to spend to insert a top quality regulator. I'm not skilled enough (or have the personal interest) to do all that you do to achieve noise level reduction goals. But I hear that hum to the point it distracts me. I EXPECT that a premium product would have come up with a solution for a flaw that they apparently know exists. In my thoughts this is analogous to Microsoft releasing products before they are thoroughly vetted and letting the customers complain, and then patch a fix -- LEDs 2.0. Perhaps you ought to sell your solutions. There is a need.

The other, have you heard anything about high intensity LEDs in the daylight range fading/harming paintings and prints?

Re: (Message Deleted by Poster)

#6

David Barnett

(Message Deleted by Poster)


Re: (Message Deleted by Poster)

#7

Thanks for the detailed reply.

Gary Smyth

Having read the definition of boost, I will have to withdraw. I'll let time and others work out the problems. Way beyond me. I'll wait it out.