Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

POWERMATIC 66 THROAT PLATE

Posts

POWERMATIC 66 THROAT PLATE

#1

POWERMATIC 66 THROAT PLATE

Doug Reynolds

I recently did some spring cleaning on my Powermatic 66 table saw. I aligned the top so the regular throat plate opening was centered on the saw blade. Now, when I tilt the blade to 45 degrees and use the larger throat plate the blade hits the left side and, does not go through the hole. The owners manual does not specify the optimal location of the throat plate to accomodate dado blades and miters, etc. Can anyone advise what would be the best way to align to top to the regular throat plate opening?

Re: POWERMATIC 66 THROAT PLATE

#2

JL

Re: POWERMATIC 66 THROAT PLATE

JL

I'm not understanding why you did this.

You align your blade to the miter slot - so that the blade is parallel to the miter slot - i.e. an equal distance from the miter slot at the blade front and back.

You mentioned larger throat plate - are you meaning the dado throat plate? The dado throat plate should NOT be used with a regular 10" saw blade. They are typically sized for an 8" dado set - but wider. The regular throat plate should be used with your 10" saw blade - at any angle from 90 degrees to 45 degrees.

As far as aligning the blade to the regular throat plate opening - my blade is pretty centered in the throat plate slot. YMMV. The throat plates are pretty generic for left tilt and right tilt saws - they don't sell left tilt throat plate and right tilt throat plates - they just sell throat plates. So, IMO - I would center it.

Re: POWERMATIC 66 THROAT PLATE

#3

Re: POWERMATIC 66 THROAT PLATE

Doug Reynolds

JL: Thank you for the reality check. I have not cut miters on the table saw in so long I totally forgot how to do it. I have no idea why I put the dado insert in to cut a bevel cut. So, now I am back in business. Thanks for the Special Agent Gibbs head slap ;^). Doug