Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Steel source for pizza cutter? *LINK*

Posts

Steel source for pizza cutter? *LINK*

#1

Steel source for pizza cutter? *LINK*

Brint in Richmond, VA

I'm thinking of making something like the product below for my wife for her birthday (with wooden handles, of course). However, I've never tried working with stainless steel before, and don't know how I'd go about sourcing or working stock. Does anyone have any advice on this?

TIA -- Brint


Rocking Pizza Cutter

Re: Steel source for pizza cutter? *LINK*

#2

Re: Steel source for pizza cutter?

John McGaw

If you don't have a local metal suppler willing to help out you can enter "stainless steel stock" into Google (without the quotes) and pick one there. Stainless should be no more difficult to work with than any other ferrous metal. A plasma cutter would be handy for getting close to the right shape but in a home shop the final work will be down to grinding and polishing no matter what you do. Tedious and time-consuming but not difficult work.

Re: Steel source for pizza cutter? *LINK*

#3

Re: Steel source for pizza cutter?

Paul Vander Woude

For small orders of metal, I order online at Speedy Metals:

http://www.speedymetals.com/

Something like this might work:

http://www.speedymetals.com/pc-1719-8258-18-x-3-304-stainless-steel-annealed-pickled.aspx

If 1/8" is too thick, look at their stainless steel sheet goods.

As for working it, if you don't have a metal cutting band saw, you can use a hack saw, and files, but it will be a lot of work. Don't try to use a wood cutting band saw- it has the wrong kind of blade, and runs way too fast. Final shaping and sharpening can be done with files and on a grinder- the rough work on a bench grinder and the finish work on something like a Tormek, if you have one, or with oil stones.

Re: Steel source for pizza cutter? *LINK*

#4

Stainless *LINK*

Mark Mandell - Gone Round In New Jersey

McMaster will sell you a 4"x12" piece of 1/8" 304 ss for $15 plus shipping

see item 8992k166.

You might do better just buying the one from Amazon (thru the WC portal, of course) and then making new "custom" handles.


Stainless

Re: Steel source for pizza cutter? *LINK*

#5

Re: Stainless

Lars Parrington

i second just buying one and making new handles. the problem with starting from raw stainless steel is that it won't be hardened. as such, it won't take a sharp edge or hold it for long.

you can buy pre-hardened steel from places like mcmaster, and you may even be able to buy pre-hardened stainless from them. if you go that route, you won't be able to cut it with a saw. but, you could cut roughly to shape size with something like a cut-off blade in an angle grinder, and then grind to final shape from there.

Re: Steel source for pizza cutter? *LINK*

#6

No one has mentioned hardening it...

John in NM

You'll still need to harden and temper the steel after shaping and 90% grinding the bevel(s). Most cities will have shops that can handle the routine stainless alloys.

Personally, I would make it out of O1 or W1 and simply dry it after washing. My favorite kitchen knives are all regular carbon steel.

Re: Steel source for pizza cutter? *LINK*

#7

(Lars mentioned it too... simultanious posting   


Re: Steel source for pizza cutter? *LINK*

#9

Re: No mention of The Co$t of hardening it...

Mark Mandell - Gone Round In New Jersey

Not just hardening but also delivering a "blade" that is straight.

The dollars are adding up on this home-made item.

A nice pair of Cocobolo handles and the original company's name sandblasted off is looking the better option.

Re: Steel source for pizza cutter? *LINK*

#10

craigd

Re: Steel source for pizza cutter?

craigd

If I remember correctly, 316 stainless is what is used for food grade utensils.

304 takes a wonderful polish, 303 is easy[er] to work.

I doubt you could harden any of these (they do work harden all too well), but for cutting pizza?

Re: Steel source for pizza cutter? *LINK*

#11

Why not a wooden one?

Doug *Link*

I saw one of these and thought it wouldn't cut the pan or like a steel one would.

http://www.shopworldkitchen.com/usr/products/50016302094_1.jpg

The cutting edge is fairly sharp and will cut a hot pizza.

Re: Steel source for pizza cutter? *LINK*

#12

Re: Steel source for pizza cutter?

Brint in Richmond, VA

Thanks to everyone -- great advice (natch - that's why I post here...). I'll probably mod the store-bought, though I'll take a look at the all-wooden option.

Thanks again --

Re: Steel source for pizza cutter? *LINK*

#13

Re: No mention of The Co$t of hardening it...

John McGaw

Would hardening even be required for a blade used in the manner this is meant for? Rocking a curved blade across an appropriate cutting surface while slicing a pizza would not present that much potential for wear, especially if the blade is sharpened at a steeper-than-a-knife angle. In a pizzeria I could see some cause for concern but in a home setting ,how many pizzas are likely to be baked and sliced?

Re: Steel source for pizza cutter? *LINK*

#14

Yes and no...

John in NM

I'm continually amazed at how dull many peoples' kitchen implements are. In the average kitchen, where nothing is ever sharpened, then no one would likely notice that it got dull twice as fast as a commercial knife. In such a case, dull is dull and the time it took to get there is a distant memory if it didn't simply pass un-noticed.

Since the OP is a woodworker, I am making the assumption that he will indeed notice when the knife dulls in short order. But then I slice bread with a sharp carbon steel butchers knife rather than a serrated one. I like em sharp.