Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Finish on kitchen floor

Posts

Finish on kitchen floor

#1

Finish on kitchen floor

Lynn Reedy

I have just installed new unfinished red oak flooring in my kitchen and several other rooms.

It has been about two weeks since I finished and I had covered the floor with a thick paper to

protect it. Now I know that I am not the only person in the world that fries bacon in the morning and that is when I noticed the small grease spots on the paper surrounding my kitchen island. My plan is to

do a light stain with several coats of minwax polyurethane. My question is "what is the best finish"

that I can apply to protect from skillet spatter.

Thanks for the help,

Reedy

Re: Finish on kitchen floor

#2

Re: Finish on kitchen floor

Mark Mandell - Gone Round In New Jersey

Skip the Minwax and go straight to the Bona Mega which you can tint to a desired color. Three coats and you'll be a happy camper (er, fryer) for years to come.

Re: Finish on kitchen floor

#3

Plan

Mark Mandell - Gone Round In New Jersey

On take-out for about 3 days :D :D

Re: Finish on kitchen floor

#4

grease on unfinished floor

Dick Coers

If you have grease on the paper, it's likely it has leaked through the paper into the floor. I would wash that area down with solvent, and do some sanding before starting the finish. A little work now will be a lot better than seeing blotches in the stain or finish. If it's sold at a big box store, it's not a professional grade finish. Check with a local Sherwin-Williams, or local flooring supplier.

Re: Finish on kitchen floor

#5

Re: Finish on kitchen floor

Richard McComas

http://www.bona.com/en-US/United-States1/BonaSystem/Coatings/Finishes/Bona-Traffic-Antislip/

Re: Finish on kitchen floor

#6

Good choice . . .

Steve Mackay

I swear on Minwax ploy. Has worked well for years and years BUT . . . if you can afford it . . . for wood floors NUTH'n can beat Verathane ("tough enough to skate on"). When I was a child (there were three of us kids worth of traffic) we put it on the floors in my parent's house. We stripped 'em (they were horrible), sanded 'em (I had an "interesting" childhood). I'm 52 now. The house is 125. The floors still look new. Maybe better than me.

Re: Finish on kitchen floor

#7

Ditto on Bona Mega

Tim Greif - West of Chicago

We had our oak kitchen (and entry hall, utility room) floors sanded and refinished about six or seven years ago and had them use Bona Mega. Just two weeks ago we had the same finisher do a "buff and coat" where they come in and use a buffer with an abrasive screen to scuff up the surface and recoat with a single coat of the Bona Mega. Got rid of all the little scratches and looks like new (aside from the normal lightening on the wood tone where the sun bakes it). I had over 500 sq ft and the charge was $325. I will probably do this every six years or so to avoid having to do a full sanding and refinishing ever again, unless we want to change the color. This stuff is very durable.

Hey Mark, I was not aware you could tint this. Not sure how we'd ever get the color to even out in the sun bleached area and match the not faded areas though.