I can't imagine making it but... *LINK*
John McGaw
...it strikes me as an uber-clever design, especially if one lived in a New-York-sized apartment. On top of that the woodworking is all pretty much traditional stuff.
Slot Sofa
Knowledge You Can Build On — Est. 1998
I can't imagine making it but... *LINK*
John McGaw
...it strikes me as an uber-clever design, especially if one lived in a New-York-sized apartment. On top of that the woodworking is all pretty much traditional stuff.
Slot Sofa
That's a clever idea . . .
Yonak
Now, if only such a structure could be made, with no braces, that didn't deform or sag over time. My neighbor who, for some reason, will never sit in a regular chair but prefers to sit on the ottoman or other stool would sit on the foot rest part of that, for sure.
Also, there's no support in the front center corners of the sofa ends. Back to the drawing board for that idea, I think.
Call it the TETRIS sofa
A little design work/engineering...
Jason Roehl in Lafayette, IN
...could easily solve that problem, I think. In that unsupported front corner, just back from the front so as to not be as visible, there could be a spring-loaded bar that would pivot into the center section when the table is removed, and angled so that it is pushed into a retracted position when the table is inserted (and presumably the table would then support that corner).
Very neat idea, though.
Jason
Re: A little design work/engineering...
Yonak
The slide-out could be separated into three units and solve the structural problem. ..Plus it would make it lighter and less awkward to pull out.
I'm not sold.
Thomas Skaggs, Foothills of Mount Level
I'm not sold on that design. As a coffee table it is not a great design. I have stuff on my coffee table....books, mags, newspapers etc. I would have a hard time with the logistics of that table.
Moving it in and out, clearing it off to move, comfort of ottoman etc. seem like issues.
I'm not sure how well it actually solves any design problems. It's a good gimmick. But I don't see it as great design.
T.
You got it right...
John in NM
I didn't like it either, but couldn't really put it into words. I think you summed it up perfectly though.
Nor I
Mark Mandell - Gone Round In New Jersey
The interior cantilevered front corners of the outside sections will sag in a short period of time based upon the structural plans displayed.
This is flimsy boat/RV furniture, regardless.