Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

sector

Posts

sector

#1

sector

John Pappas

I may be mistaken, but I don't believe that 'sector' is a household word in the woodworking community. WOODWORK magazine published an article about a sector in the Feb 1998 issue by Tom Caspar. (I don't think that mag is published today.) The sector's main functions are dividing a line into equal parts, and finding proportions. I made a sector at that time and mainly use it in laying out dovetails (works great)...and, a few times when designing a piece of furniture.

Popular Woodworking recently had an article on using a sector in their June 2011 issue, which resulted in Christopher Schwarz doing this video. Perhaps, if it is new to you, you will find this interesting.

http://www.popularwoodworking.com/article/make-a-sector-from-a-crappy-folding-rule

Re: sector

#2

Re: sector

William Duffield

It only needs two pairs of marks. One pair near the end and whatever that distance is from the hinge, the second pair at 0.618 times that distance.

Thats the only proportions you need.

Such a devise makes the Lee-Valley Phi (Golden Ratio) Rules totally obsolete if you start with a 36" four-fold rule.

Ducking and running.

Re: sector

#3

Re: sector

John Pappas

William,

My sector is 16 inches long with two scales. One from 0 to 8 with 2 inch increments, the other from 0 to 16 in 1 inch increments. Interesting that someone on Christopher Schwarz's blog pointed out that the 8 and 13 markings have a ratio of 1.625 which for practical reasons is close enough for the Golden Rectangle. I marked those in red on my sector.

John

Re: sector

#4

Re: sector

William Duffield

I missed that tip! Of course, the golden ratio is useful, and some designers swear by it, while others totally eschew it as totally unnecessary, instead using whole number proportions. My comment, of course, was to a certain extent tongue-in-cheek, to perhaps stir up a little useful debate (like pins vs. tails).