Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

WoodCentral to the rescue

Posts

WoodCentral to the rescue

#1

WoodCentral to the rescue

Jerry Gibbs

I stupidly glued up a clock with a twist. The clock is about 14" x 8" x 4". I discovered the twist about 6 hours after the glue was applied- white pva. I was angry at myself and distraught at the lost work. A quick check of the archives found I could apply heat and force the joints apart (shallow mortise and tenon). Using a hair dryer and my old bench top WorkMate, I forced the joints apart. I plan to use the table saw top and rip fence to get a flat and square glue up. May try liquid hide glue in the future. Jerry

Re: WoodCentral to the rescue

#2

Re: WoodCentral to the rescue

roger rayburn

Good to know. I'd heard of using vinegar, but not heat. I never tried vinegar, but I think I'll try this one.

Re: WoodCentral to the rescue

#3

Bob

Re: WoodCentral to the rescue *LINK*

Bob

I bought a 20 OZ bottle of Old Brown Glue from Patrick Edwards when I went to ASFM in San Diego. He formulated a liquid Hyde glue to use right out of the bottle and it has all the same advantages as cooking your own, What I like about it is it has a long working time and its reversable.


Old Brown Glue

Re: WoodCentral to the rescue

#4

Re: WoodCentral to the rescue

Joseph Mulherin, sr

Thank you, Bob, I bookmarked the page for when I order some later.

Re: WoodCentral to the rescue

#5

Hide Glue

Dave Bair

I've had good results with Titebond's liquid hide glue. It's available over-the-counter in my area.

Re: WoodCentral to the rescue

#6

Re: WoodCentral to the rescue

Bruce, a MN Galoot

Old Brown Glue is also available at Rockler's.