Finish Striper
Larry
I'm looking for a good Finish Striper.
Thanks
Knowledge You Can Build On — Est. 1998
Finish Striper
Larry
I'm looking for a good Finish Striper.
Thanks
the best
Bill Tindall, E.TN.
the best will have "methylene chloride" as an ingredient. Wear gloves as it stings the tender places. But it strips anything, even the cross linked finishes.
Where do you get it Bill?
Bob
Where do you get it Bill?
Re: Where do you get it Bill?
Bill Tindall, E.TN.
By looking at labels in the usual places (paint stores, Lowes, auto body suppliers) I have always found a product that has methylene chloride combined with methanol in the ingredients. Nothing else is as aggressive at softening any kind of finish.
Re: Where do you get it Bill?
Bob
Thank You Bill
Re: Finish Striper
Jerry Roberts
couple years ago I was refinshing an old large rocker. I tried everything I could think of. Of course I didnt know of the meth chloride then. As a last resort I tried some acetone that I had in the cabinet. It worked great except it evaporated rapidly so I had to buy some more but it worked good. I then made my own wipe on poly and it still looks good after a couple yrs. Good luck.
lacquer
Bill Tindall, E.TN.
Acetone will dissolve lacquer and maybe shellac but not pain, varnish or anything with urethane in its name.
Lacquer is miserable to strip. It dissolves and makes a sticky goo that is difficult to wipe off. The "curing" finishes don't dissolve. Rather they soften, let go of the wood and peel off in sheets of rubber finish.
Re: Where do you get it Bill?
David Yoho
Bob, since we're in the same area, try looking at HD for BIX stripper. It's what I've always used and it works. I haven't purchased any recently so not sure if they still carry it. I believe it has an orange label on the can.
Re: Where do you get it Bill?
Bob
Thanks David