Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Does anyone have a Mortise Pal?

Posts

Does anyone have a Mortise Pal?

#1

Does anyone have a Mortise Pal?

Merle

I am getting geared up to make a set of 4 chairs. I was inspired by Joe Mulherin's epic rocker project to try my hand at chairs for the first time ever. I also need to confess that all my mortises and tenons are not perfect fits which is a critical concern with chair making as I understand it from the reading I have done.

Therefore, while researching the latest M&T options, I ran across the Mortise Pal. It is said to be able to make mortises for chairs although there was no mention of compound angles. So, you have one? Do you love or hate it? Have you used it for chair making with compound angles? Any other pertinent info?

Re: Does anyone have a Mortise Pal?

#2

Re: Does anyone have a Mortise Pal?

Robert Lemon

google Rig-A-Mortise

Re: Does anyone have a Mortise Pal?

#3

David & Robert

Merle

Thank you for your replies. I'm really looking for hands on experience, however. Regarding the Rig-A-Mortis, I wasn't able to find much info, but I did find a home made jig that I doubt that it would be useful for mortising the end of a chair rail. I'll keep searching.

Re: Does anyone have a Mortise Pal?

#4

What kind of compound angle?

John in NM

I've never used that tool, but I've made similar jigs for doing door mortises. I don't really see how it would do a compound angle.

I do have a question though, how necessary is it to do angled joints? Sometimes you can do a straight tenon for chair legs and a non-square leg to achieve the desired shape. Seems like an easier nut to crack, and stronger chair as well. I may not understand what you are driving at.

The only machine I have experience with for compound angle mortises is a multi-router, and though they are wonderful machines it always struck me that they tended to make a weak chair. That would be of no concern if you are using floating tenons though, we were making these angled tenons where the grain ran out the side of the tenon.

Re: Does anyone have a Mortise Pal?

#5

Re: Does anyone have a Mortise Pal?

Mike Circo

I've had one for a while and like it a lot. Simple and efficient. I have made those handy little holes many ways over the years, but this is by far my favorite.

For compound angles I believe you insert wedges matching your angle into the head or side of the jig. Gives consistant results. Have you checked their site? A few years ago when I bought mine, they had some videos on compound mortises, offset mortises, etc.

Re: Does anyone have a Mortise Pal?

#6

I am reading a book

Merle

(I know, dangerous) that mentions compound angles on captains chairs for example. I am not planning on that now, but I want to keep my options open for future projects.

Re: Does anyone have a Mortise Pal?

#7

Mike, thank you!

Merle

This is exactly the info I wanted. You like the jig and it works as advertised. Do you make your own tenons? Have you found instances when a floating tenon was not adequate for your needs? My thought is to use floating tenons exclusively if this is feasible.

Re: Does anyone have a Mortise Pal?

#8

Sweet...

John in NM

I hadn't thought of that, but a little jig like that could be just the ticket for spindle holes. For some reason I automatically thought of frame chairs, maybe my head runs that way because I never seem to get the hang of turning stuff.

Re: Does anyone have a Mortise Pal?

#9

Re: Mike, thank you!

Tony - Memphis

First I have heard of them, but it sure looks like a neat product. Seems a little expensive, but I could see where it would be very convenient. Looks to be very well made too. I'll have to put that on my Santa list! Let us know how it works out for you.

Tony

Re: Does anyone have a Mortise Pal?

#10

Re: Mike, thank you!

Mike Circo

Glad to be of some help.

Yep I make my own floating tenon material. It's extraordinarially easy if you have a planer. Generally it's a great use for shorts, cutoffs and mixed bag of leftover wood. Just be certain when testing the fit that there is no snipe on the end you test! (DAMHIKT).

I've used both traditional tenons and floating ones. I don't have any science to say if a traditional tenon is stronger, I just feel that it is, so use them when suitable. But there is no doubt that the floating tenons are easy, especially for complex construction, where there are many matched tenons, or in large assemblies.

Either way, the jig works the same. Key is a good upcut spiral bit, a plunge router in the 2hp class (bigger ones are too heavy an unwieldy for the jig). Follow the directions. Plunge in and out at each end and between, then to a clearing pass. If you clear the chips, and follow the steps it's pretty fool proof.

Re: Does anyone have a Mortise Pal?

#11

Mike, I guess I am 95% sold

Merle

I will sleep on it and make my decision in the AM. Again, thanks for the info.