Made as wedding gift for my son and his new bride, this hope chest is made from solid walnut, and sapele, with veneers of anigre and walnut. The interior is lined with aromatic cedar. The design reflects a theme of "The Two shall become One."
A photograph of the couple taken on their wedding day is inset into the lid-and can be seen when the lid is opened. Gilded inset carvings frame the photograph.
The solid walnut frame pieces and the walnut veneer side panels: Stained with a waterbased Rosewood stain from General Finishes
That did raise the grain -sanded lightly then after it was dry applied a washcoat of Minwax Red Mahogany
The Black squares on the front anigre panels are -1/8" strips of walnut. They are painted black. -RustOleum rattlecan
The small gold squares are gilded pieces of the anigre veneer which is fairly thick-aprox 1/16" Those pieces and the inset carvings on the underside of the lid are gilded with Mica Powder mixed in shellac.
Then the entire outside of the case was top coated with Tung Oil finish.
The Sapele top was top coated on both sides with the Tung Oil finish.