Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Treating wood to dissolve it

Posts

Treating wood to dissolve it

#1

Treating wood to dissolve it

Martin

Hello,

I am looking for a method of treating wood whereby the softer parts will be eaten away and the harder parts will remain. Essentially, I want to have the grain of the wood visible and tangible - like when wood has been exposed to the elements for some decades. I would like to try this with olive wood and briar wood, so the grain will be pretty compact in the case of the briar and not as much with the olive.

I have already tried using sodium hydroxide, but the results weren't ideal. I have also used hydrogen peroxide 30% solution with ammonia as a catalyst but my results weren't good there, either. One of the reasons being it was difficult to stop the reaction once it had started. I have thought about trying oxalis acid next, but would like some advice from woodworkers before I go throwing away more money.

I have looked up processes for aging wood online and have only found methods for coloring the wood, and not necessarily creating the tangible effect as well. Thanks in advance for any advice.

Cheers

Martin

Re: Treating wood to dissolve it

#2

Re: Treating wood to dissolve it *LINK*

Tom Dunlap

You might get some help from the Forest Products Lab in Madison Wisconsin.


FPL

Re: Treating wood to dissolve it

#3

Considered media (sand) blasting?


Re: Treating wood to dissolve it

#4

Re: Considered media (sand) blasting?

Martin

Hello

Thank you for the responses. I do like blasting and it's effect a lot, but I don't have a blasting cabinet, and the effect that I'm looking for is a bit different...softer, maybe. I'll check out the company suggested by the other poster. Thank you again.

Cheers

Martin

Re: Treating wood to dissolve it

#5

David Barnett

(Message Deleted by Poster)


Re: Treating wood to dissolve it

#6

Re: Selective delignification —

Martin

Thanks very much for the informative response. I'll be giving the forestry departments a call tomorrow. As far as pipe making goes, I want to get this effect for other things, too. I thought it would look really nice for turned pieces, such as fruitsv and toys for my kids, too. The exact effect is being done by only a couple pipe makers afaik. The most I have seen are from Wallenstein. http://www.cupojoes.com/cgi-bin/spgm?dpt=W&srch=DW&item=wala08

Thanks again for the info.

Cheers

Martin

Re: Treating wood to dissolve it

#7

David Barnett

(Message Deleted by Poster)


Re: Treating wood to dissolve it

#8

Re: Ah... Wallenstein (Blue Lobster) - here's one

Martin

http://www.pbase.com/martinrr/image/127756373

here is a perfect example of what I want the wood to do. If anyone can tell me what does this to wood, I would be grateful.

thanks again

Martin

Re: Treating wood to dissolve it

#9

Heavy wire brush on an angle grinder

John in NM

I did a door that way once, it was a real pain but gave the effect you describe. Of course that was with oak rather than olive wood, so it might not have the effect you're looking for on a more close grained wood.

Re: Treating wood to dissolve it

#10

Years ago

Lee Schierer McKean, PA

Many years ago, I was shown a method of using a wire brush to remove the soft grain from wood, leaving the harder grain behind. I made textured plywood covers for a scrap book. It left the surface wavy. Back then I used a hand brush, but I imagine you could use a soft wire wheel in a drill or rotary hand tool to do the same thing. No chemicals would be involved.

Lee

Re: Treating wood to dissolve it

#11

Re: Old technology

Rick Lizek

Lightly burning the wood with a propane torch before brushing works well

We do timbers and smaller pieces with these techniques...

https://www.flap-wheels.com/

http://www.quickwood.com/

Paasche Mini sandblasting gun

http://www.aswexpress.com/discount-art-supplies/airbrush-equipment/paasche/air-eraser/paasche-air-eraser-kit.html?utm_source=googlebase&utm_medium=cpc&utm_campaign=shopping&gclid=CMmZiJvf0bUCFcme4AodXHsArg Mini sandblasting gun

Table top Sandblaster

http://www.wttool.com/index/page/product/product_id/19071/product_name/Table+Top+Sandblaster+%28WT%29&update_continue_shopping=true

Re: Treating wood to dissolve it

#12

Rick L

Re: Scale it down...

Rick L

to using a Dremel and small wire brushes.

Re: Treating wood to dissolve it

#13

David Barnett

(Message Deleted by Poster)


Re: Treating wood to dissolve it

#14

Re: Yes, but he said 'briar', Lee

Martin

First of all, I need to thank you all for all of the advice. You have given me other ideas to try at a later time.

Secondly, David, I couldn't have responded better with a more informed answer stating the properties of briar than what you have so eloquently given. Although I plan on using this technique for more than just pipe making, the truth to your explanation still stands. And I wholeheartedly agree with your closing...amazing stuff, briar.