Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Myrtle block for audio components

Posts

Myrtle block for audio components

#1

Myrtle block for audio components

Mike Rubes, Apex NC

Hi all,

Has anyone heard of putting your stereo components on little blocks of myrtle? The idea, supposedly, is that the myrtle absorbs some of the vibrations in the equipment? A guy at work asked me about it and I was a little shocked at how much he said they were selling these little blocks of myrtle for. The one brand I found on the web had some great marketing, claiming myrtle was the "rarest of all woods" etc, etc,

Anyway, it got me thinking, would there be a better choice for a vibration dampening wood than myrtle? What is so special about myrtle? I've only turned it, never worked with it in board form.

Just curious if anyone has heard of this or uses it and if it really makes a difference?

Thanks,

Mike

Learning something new everyday in Apex, NC

Re: Myrtle block for audio components

#2

Re: Myrtle block for audio components

Bill Houghton, Sebastopol, CA

If we're talking the wood sold as Oregon myrtle that's called bay laurel when it gets south of the (Oregon-California) border, it's certainly not rare around here. Maybe it's rare in the same way that a rusty Stanley No. 4 is rare on eBay. Presuming it is this myrtle*, the fact that the company's website is making such an outrageous claim about the rarity of such a common wood makes me skeptical about the claim of vibration dampening, too.

It would be an interesting test, myrtle against other hardwoods.

*Googling myrtle gets me just Oregon myrtle. There are claims that it grows only in a very limited area in Oregon, which is apparently true; but it's the very same species that grows all over the place in northern coastal California. The tourist shops up north devote entire sections of the shop to myrtlewood bowls, card cases, etc.

Re: Myrtle block for audio components

#3

Re: Myrtle block for audio components

Jerry Nicholson

I just looked this up and found that the myrtle blocks are dimensioned according to the golden mean. I assume that means they are magic because they are supposed to "drain away the resonances". Looking at the prices that the folks selling the myrtle blocks charge for "magic" speaker cables, I would say that old P.T. Barnum had it about right.

Jerry

Re: Myrtle block for audio components

#4

Re: Myrtle block for audio components

Bill Houghton, Sebastopol, CA

I wonder what would happen if they were made in a pyramidal shape?

No, in thinking about it, that wouldn't work; the music would always be sharp, not on pitch.

Re: Myrtle block for audio components

#5

David Barnett

(Message Deleted by Poster)


Re: Myrtle block for audio components

#6

Heresy!

Jerry Nicholson

What, no Russian copies of American thermionic valves from 70 years ago? No oxygen free gold plated double ought gauge speaker cables insulated with the skin of Patagonian sheep sacrificed at midnight under a full moon?

And you call yourself an audiophile!

Jerry

Re: Myrtle block for audio components

#7

David Barnett

(Message Deleted by Poster)


Re: Myrtle block for audio components

#8

David Barnett

(Message Deleted by Poster)


Re: Myrtle block for audio components

#9

Search for pure never ends

Gary Smyth

This post struck a chord. After Christmas dinner last, I had a (15 yr. old) nephew ask me “What is a audio turntable?” He was serious. At the time he was only moments away from the conversation of whether the best purchase the next day would be the $600 iphone or the $600 Samsung for listening apps. At the time they were discussing classical music. Digital or not, I didn’t get it. I mean, how could they? Where was their head? I didn’t get involved in THAT audio mêlée but I do remember similar audio based conversations held some four or five decades earlier when I was passionately involved with listening to and playing music regarding brand names few now know: Heath Kits, AR, Fisher, McIntosh, Harmon-Kardon, Rectilinear, Altec, Nagra, Revox, Studer, Dolby, Advent, Marantz, Klipsh, Luxman, Bang & Olufsen, JBL, Sherwood, Dahlquist, Phase Linear, Dual and so many others. Back then I could debate for minutes specialized counterbalanced tone arms, lightest tracking cartridges, round or oval, diamond or sapphire stylus pickups (This at a time where the needle was steel and the tone arm in my family’s home "record player" was held steady by taping down two pennies on top to the tone arm.) I could recite specs regarding signal to noise, RMS, tape hiss, 7 1/2 vs 15 ips recorders. Today especially if you are an audiophile that prefers vinyl, I’d put most of those 1960's brands up to anything passing for audio on the market today. But kids have different priorities for what they want to hear. Maybe with a bit of added age the pendulum will swing back to seeking the cleanest quality sound. Myrtle for sound deadening? My friend you have barely scratched the surface. If you want to dampem seek out a 1/4" black rubber pad and/or a 1/2" to 3/4" foam pad. In my view better and far less expensive.

Re: Myrtle block for audio components

#10

Whence the transmission line plans?

Henry Higginbotham

I did a quick search for "Konus transmission line diy" and got results, but what I looked at didn't make it clear if the builders just threw together something similar to the Konus, or if they'd found actual, official cabinet plans and driver specs. Has the designer made the plans available for DIYers?

Re: Myrtle block for audio components

#11

Re: I'm too niggardly...

Jerry Nicholson

All that so you can hear the scratches and hisses of the vinyl records really well :D :D When I built my first stereo system 50 years ago (I had monaural components earlier than that) I built my amplifier from scratch using surplus Eico Williamson output transformers and WWII surplus 1625 power tubes (12 volt version of an 807, kind of like a more powerful 6L6 with a plate cap). I even wound my own filament transformer. Everyone else had a Garrard turntable so I bought a Benjamin Miracord. That Miracord still works, I used it recently to convert some of the old vinyl to MP3s for my wife to play in the car. I sold that power amplifier at a friend's garage sale about 30 years ago but I don't know how much use the buyer got out of it because 1625's that weren't gassy were getting really hard to find. I had purchased 10 of them for 25 cents each. Woodworking connection: The speaker cabinets represented some of my earliest woodworking efforts and weighed about 80 pounds each. I sold those about 30 years ago too.

Jerry

Re: Myrtle block for audio components

#12

Re: Search for pure never ends

paul in AZ

Memories....

I had the same Ampex; Mac; & Shure pumping through big Wharfedales.

That stuff was one of the biggest arguments in the divorce. She got it all.

Re: Myrtle block for audio components

#14

David Barnett

(Message Deleted by Poster)


Re: Myrtle block for audio components

#15

Thank you, David

Henry Higginbotham

I've always wanted to build a pair of TLs. The Jordan drivers seem to be No Longer Available, but apparently you used something much less expensive if you came in under $75, including cabinets and that six-nines veneer. :)

Re: Myrtle block for audio components

#16

Re: Only three nines?!  Ha!

Stuart Hough

Is that name pronounced in standard English-style (short i) or in the germanic style (ee)? :D

Re: Myrtle block for audio components

#17

Re: Only three nines?!  Ha!

Henry Higginbotham

From their FAQ:

YES, that is our name. And yes, it’s pronounced exactly how you think.

So, however you think. I prefer to separate the double-i and give it a Southern drawl. :D

Re: Myrtle block for audio components

#18

Henry! Hahahahahahahahahahaha ROFLMAO!

Stuart Hough

toured the site.....as Artie would say.....Veery eenteresting!

Re: Myrtle block for audio components

#19

A True Suthern Man

Mark Mandell - Gone Round In New Jersey

Would need at least three (peraps foa) "e"s to got with them i's, but a bell would just use a pair of o's.

Re: Myrtle block for audio components

#20

David Barnett

(Message Deleted by Poster)


Re: Myrtle block for audio components

#21

Re: Magic Myrtle — audio tweaks & the placebo ef

Bob Entwisle in NJ

David,

Thanks for the link to Ethan Winner's presentation!

I found it refreshing to finally have all that subjective audiophile hooha presented in a clear and concise way.

I might have to buy his book!

But surely an IEC power cord like this one will improve the performance of even the simplest systems?

Shunyata ZTRON Anaconda Power Cable

http://www.dedicatedaudio.com/inc/sdetail/125/33367

Or would I just be ok adding one of these to my existing power cord?

Acme Audio Myrtlewood Power Connector Tuning Device For The Ultimate Power Cord

http://www.dedicatedaudio.com/inc/sdetail/125/23685

It’s tough to be an Audiophile, or is that AudioPile, I never quite get the spelling right :D

Bob in NJ

Re: Myrtle block for audio components

#22

David Barnett

(Message Deleted by Poster)


Re: Myrtle block for audio components

#23

"It'll purr like a kitten. And your coffeemaker!"

Bill Houghton, Sebastopol, CA

Our coffeemaker just beeps when it's done. Where do you get coffeemakers that purr? Is this yet another area where I'm not keeping up with the cool stuff?

Re: Myrtle block for audio components

#24

Re: Myrtle block for audio components

Mike Rubes, Apex, NC

Wow, guys. Thanks so much for all the information. This was more than I expected, but all great stuff.

Thanks!

Mike