Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Pedestal Table Design Guidelines

Posts

Pedestal Table Design Guidelines

#1

Pedestal Table Design Guidelines

Don Stephan

Wondering if there are any general guidelines for the pedestal component of pedestal dining tables. "Pedestal" is used to include a base, the column itself, and a sub-top. It is assumed that a 1/2" threaded rod will securely connect these three components. The base may sit directly on the floor or on bun or similar feet, and the sub-top is connected with screws or other fastening system to the top itself.

For a square or round tabletop, my understanding is that a solid base (similarly square or round) should reach within ten inches of the "drip line" of the top. For an X-shaped base my inclination would be to similarly size the length of the X members.

For an oval or elliptical tabletop, a similar 10" guideline for a solid oval or elliptical base would seem likely to provide good tip resistance if flat on the floor. As the length of an oval or elliptical table gets proportionally larger than the width, the tipping potential for bun feet under a solid base and alternatively for an X-shaped base would seem to increase.

Anyone have a general rule when to use two pedestals rather than one, as the length of an oval or elliptical top gets proportionally greater than the width?

Related discussion also welcome, as I don't have much reference materials on pedestal table design.

Thanks.

Re: Pedestal Table Design Guidelines

#2

Re: Pedestal Table Design Guidelines

Bill Tindall, E.Tn.

I don't have much experience but this seems to be a case where a mock up would be worth the effort.

I made an octagonal "porch table" that we eat on in the summer. It has 12" overhang, but, the base is heavy. It is not tippy.

Re: Pedestal Table Design Guidelines

#3

Re: Pedestal Table Design Guidelines

Bob Lang

I've never seen any "official" guidelines, but I'm happy to make some up. I think the safe approach is to locate the feet about where the legs would be, if the table had legs instead of the pedestal.

The legs or feet, column and top plate need to be a solid assembled unit. In factory furniture the column is generally hollow and dowel screws are used to attach the legs to the columns. At the top, the plate is held to the column in a similar fashion.

There are too many variations in styles and designs to formulate anything like "10" in from here". As Bill suggested, make a mock-up.

Bob Lang

Re: Pedestal Table Design Guidelines

#4

Re: Pedestal Table Design Guidelines

Joseph Mulherin,sr

A few yrs ago I made 6 poker tables with a column of 8" dia to which I attached some band sawn feet screwed to the colukn matching the upper table width for stability. They cam e out fine and are in use today in various places.

Re: Pedestal Table Design Guidelines

#5

Re: Pedestal Table Design Guidelines

Don Stephan

Great suggestion Bob. Don't know why I didn't think in terms of a four leg table.

To size the column, I'm going to consider making its cross section 10% and 20% of the length and width of the table top, and see how the drawing looks.