Jet 16" Planer value?
Gary
Hi all, new to the forum and hoping to get some advice.
I'm in the market for a thickness planer around 15" to 18". Looking at used for budget reasons. So luckily, I see an ad for a Jet JWP-16OS (http://www.jettools.com/us/en/p/jwp-...-planer/708531 ) asking for $1000. Worth a look because he's only 9 miles away.
Upon inspection, the planer has been and is outside for about 6 months on the back of a parked pickup truck covered with a tarp. There's rust everywhere. I can see the table height adjustment lock knob is broken, dust chute hood is missing, and not sure if anything else is missing or needs replacement. On the positive side, unit comes with 2 spare sets of knives (need one set to replace the set in the unit), the height adjustment moves and travels freely despite the rust on the 4 columns. It looks like it could be cleaned up and run again. Did not power the planer up and not sure we could of.
My main concerns is the time needed to clean and tune this planer up. It will need a complete tear down to clean out the rust, new blades for sure, alignment and tuning the bed and cutter head, change gear box oil, etc. Some replacement parts will have to be ordered and I'm worried what else may have to be replaced that's not visible until its torn apart. Wish I took a picture, but was in slight shock just seeing it.
I did make an offer the following day, but after not hearing from the guy a couple of days later, I called again and was told he was insulted with the offer and didn't think a response was warranted. Yikes!
So what do you think a reasonable price should be? I won't tell you mine, since that will influence your number. And finally, I do believe the planer is slavageable and can manage stripping the unit apart to clean it. I just worry is it worth my time and possible aggravation. It may turn out to be a painless venture or could be kicking myself for throwing money away on a boat anchor and I don' own a boat. What do you think?



