Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

What to do with old planer knives?

Posts

What to do with old planer knives?

#1

JL

What to do with old planer knives?

JL

Talked to one of my friends who is a blacksmith (also an engineer - but I won't hold that against him).

The steel on my planer knives is a modern blend of HSS that can't be easily forged or tempered. Therefore he can't use it for his toolmaking class.

I hate discarding expensive steel. I can cut it with an abrasive wheel or by scoring and snapping it - followed by polishing. So I can get it into smaller pieces rather than 13". I can also shape it somewhat with a grinding wheel.

What to do with it? I could make some small scrapers - but we're talking 39" worth of steel. Any other suggestions?

Re: What to do with old planer knives?

#2

Bob

Re: What to do with old planer knives?

Bob

Marking knives and or carving knives? Yea carving knives would be a good use for them.

Re: What to do with old planer knives?

#3

David Barnett

(Message Deleted by Poster)


Re: What to do with old planer knives?

#4

Re: What to do with old planer knives?

John McGaw

I face the same conundrum. My best idea so far is to make a L-R pair of marking knives out of one blade and some left-over rosewood. My assumption was that the blades could be annealed, shaped, and then re-hardened but given the simple shapes required for marking knives simple grinding and polishing might be sufficient.

Re: What to do with old planer knives?

#5

chisels and lathe tools

Bill Tindall, E.Tn.

The steel is most likely M2. You can grind dandy chisels from them. Just keep the blades short (5"about) or they will be too limber. The one on the bottom shows the pattern to grind. Don't worry about loosing hardness as they will be tempered at about 900F.


Re: What to do with old planer knives?

#6

Bob

Re: chisels and lathe tools

Bob

Good use Bill.

Re: What to do with old planer knives?

#7

craigd

Re: What to do with old planer knives? *LINK*

craigd

Machete and batoning chisel? (I'm guessing planer knives are tough stuff and able to take a beating).


LV Batoning Chisel

Re: What to do with old planer knives?

#8

Bob

Re: chisels and lathe tools


Re: What to do with old planer knives?

#9

Re: What to do with old planer knives?

Philip Duffy

I make scrapers out of them and they perform better than anything I can buy for my lathe work. Try taking them to the next woodworks/turners club and see who needs one or two. Philip

Re: What to do with old planer knives?

#10

Why is it that I tend to shy away.......

Richard Jones

from anything that says "Ultimate"? That sounds like the topic of a good thread...............

And D2 seems (to me) like an odd choice for that "tool"............

Re: What to do with old planer knives?

#11

Re: chisels and lathe tools

Richard Jones

They make dandy lathe tools, just grind them to whatever shape you need. I use them mainly as scrapers for different sized coves.