Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

hole filler

Posts

hole filler

#1

hole filler

Yonak

There is a BB-sized hole in my hardwood floor at my wood stove, which was created by a wayward hot ember. I have dug out the carbon black and it now is the color of the rest of the floor, but it's still a hole there. While I'm OK with leaving it that way for the sake of authenticity, my wife feels we ought to fill it in and make it less noticeable.

It seems to me the filler should be something that is clear and dries hard. I thought about that stuff used in decoupage but I don't know how hard it would dry and if it would tend to shrink. There's some clear substance some have put on bars to embed coins, shells, bottle caps, aquarium gravel, etc. I wonder how that would work and what it's called. Would the thick CA glue do it ? That would be easy to apply.

Thanks.

Re: hole filler

#2

Re: hole filler

john Veerkamp

Use two part clear epoxy. It can be colored with wood dust or finely ground coffee to closer match the existing wood. It will set up plenty hard and be buffed to whatever sheen the floor has.

Re: hole filler

#3

Make it disappear.

Lee Schierer McKean, PA

You can make it disappear by cutting a face grain plug from a similar grained piece of wood and plugging the hole. Drill the hole out to 1/4" and use a 1/4" face plug cutter to make a plug. Apply some wood glue, tap it in the hole shave it off with a chisel and apply a little of the same finish that is on the floor. Once it dries, it will be difficult to find if you did a careful job matching the grain and stain of the existing floor.

Lee

Re: hole filler

#4

Re: hole filler

John in NM

I use PC-11 marine epoxy for filler. Transtint dyes go right into it and it sticks much better than any wood dough type putties I've tried. I used to see this stuff in hardware stores all the time, but now in the days of Home Despot and Lowes, it's getting a little hard to find. Last batch I bought was in a True Value in Las Cruces that also carries Waterlox (bought a gallon of that too :D )

Of course, if you don't have a couple dye colors already, that route gets kind of pricey. I like face grain plugs too, you'll probably never notice from 5-6 feet above the floor :D

Re: hole filler

#5

Re: Make it disappear.

Dick Coers

I'm not a fan of making the hole bigger, but whittle down a piece of the same stock and fill the hole with the smallest face grain piece that will fit. Thick CA will also work, but keep the cat away while it sets. Be a shame for him to stick to the floor!

Re: hole filler

#6

Re: hole filler

del schisler

here is what i would do , if you have a fuller brand with twist bit and counter sinker, and a fuller tapered plug cutter, and if you happen to have a piece of the wood floor left over , drill out the BB size hole and put a plug in their, the plug is tappered so it will fit tight, you can turn the grain to match , than sand down or cut off with a saw blade or chisel ,and finish ? my 2 cents