Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

sticky adheasive under water

Posts

sticky adheasive under water

#1

sticky adheasive under water

eliot d

I recently purchased the Veratas MK.II Power sharpening System. The fellow who sold it to me ( at a woodwoking show) gave me a tip on attaching the sticky-back abrasive sheets to the aluminum disk platens. He suggested doing it under water and then using a roller or similar device to squeeze the water out. He said it would eliminate dust and bubbles, etc. from getting trapped in there. I've called up to Canada to talk to the guy again because I am having some trouble wrapping my head around this idea. (But he ought to know.) Has anyone here tried anything like it? is it worth the trouble?

Re: sticky adheasive under water

#2

Re: sticky adheasive under water

eliot d

No one here seems to have any experience with this one. The guy from Veritas didn't call yet either; so I just went ahead and did it-- the under water stick on. It worked fine. I guess listening to the reps is a good idea.

Re: sticky adheasive under water

#3

Re: sticky adheasive under water

Butch...Mn

I collect and restore a few old tractors as well as playing with wood for fun and entertainment. Some good friends of mine make and sell decals for any Minneapolis Moline tractor and implement that the company made. They have told me, starting years ago, to mist the surface the decal is to be applied to with a water and dish soap mixture, put the decal on the surface and move it around until it is in the desired position, then use a plastic credit card as a squeege to remove the soapy water from between the surface and decal. Without the soapy mixture, you have one and only one chance to get the decal positioned correctly. It works unbelieveably well. Decals and the adhesive of the discs would be quite similar.

Re: sticky adheasive under water

#4

Re: sticky adheasive under water

Don in Central Illinois

Years ago I worked at a grain dryer manufacturer and when we put on large decals we always applied soapy water to the surface, then appkied the decal, positioned it and squeeged out the water. I have seen some of these 40 years later and they're still in place.