Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

toys

Posts

toys

#1

toys

Paul Blackwell

Does anyone know the status of the proposal to require all toys to be inspected by a lab if they have a finish applied? Last I heard, it had been postponed for a while. Also, I got a call from a shop that handles only american made products. They want me to supply some items for the shop, jewelry boxes, keepsake boxes and toys. I'm a little leery about the toys. Would I have to have liability insurance? That would surely be a deal breaker. Kids are very inventive when it comes to injuring themselves. I make my toys as safe as possible, no small detachable parts, smooth all edges, etc., but I certainly couldn't afford a lawsuit.

Re: toys

#2

Re: toys

Lee Schierer McKean, PA

My suggestion would be to contact your local U.S. Representative or Senator. You could also try the local manufacturing association.

Last I recall hearing was that it would not affect hobbyists. The other answer would be to make toys from Maple and then use no finish at all. Let the wood develop its own natural patina over time.

Lee

Re: toys

#3

toys

Merle

You could start your search with this link. However, some states are starting to enact their own laws because they don't think the Federal regs are sufficient.

http://en.wikipedia.org/wiki/Consumer_Product_Safety_Improvement_Act

Re: toys

#4

Re: toys

Howard Acheson

Details can be found at the following site:

http://www.cpsc.gov/about/cpsia/smbus/manufacturers.html

Bottom line, there was NO delay in implementation. The regulation is in effect now. All items intended for use by a child 12 years old or younger must be tested by a certified testing facility.

Re: toys

#5

Re: toys

Yonak

Note that this specifically exempts products made of wood.

Re: toys

#6

Re: Wood Toys

Howard Acheson

>>>> Note that this specifically exempts products made of wood.

Yes, as long as the item does not contain any other materials (fasteners, adhesives etc) and is not painted/coated or otherwise surface treated with a chemical(s).

Re: toys

#7

Re: Wood Toys

Yonak

That's right. You may be able to get an MSDS from the appropriate manufacturers to verify there are no hazardous materials in the additional materials and avoid the testing requirement.

Re: toys

#8

Re: Wood Toys

Howard Acheson

>>>> You may be able to get an MSDS from the appropriate manufacturers to verify there are no hazardous materials in the additional materials and avoid the testing requirement.

Makes sense but it doesn't fly. The only ones who can test and certify are testing companies certified to do the testing. Also, it's the completed item that must be submitted for testing. Individual component testing is not OK as I understand it.