Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Purpleheart?

Posts

Purpleheart?

#1

Purpleheart?

Jerry Nicholson

I am looking at using purpleheart for a couple of keepsake boxes. Can anyone enlighten me as to the pitfalls and problems in using this material? Does it chip, splinter, or tear out when machined, does it tend to burn, does it warp, is there any problem in gluing, are there problems with finishes?

Jerry

Re: Purpleheart?

#2

craigd

Re: Purpleheart?

craigd

I've used a fair bit of purpleheart and found there are two types: one with straight grain that tends to be brownish and one that has twisty interlocked grain and is more ultraviolet. The straight grain one is just wonderful with hand tools, the other is just about impossible.

Both machine well. They do splinter but it is easy to control. I used a router on two benches and don't remember any issues with burning. No problems with warping, gluing or finishes.

Here is a plane with both types:



Here you can see the color difference a bit better:



And two benches, one unfinished and the other with a Tung oil + varnish finish:


Re: Purpleheart?

#3

Re: Purpleheart?

Dick Coers

The one board I ran through my thickness planer sounded like I was feeding a rock through it. Saw shiny specks in the grain and the knives went really dull. Finished the jewelry box for my daughter and swore off the stuff after that.

Re: Purpleheart?

#5

It doesn't stay purple

Bill Tindall, E.Tn.

but it ages to a rich lovely brown

Re: Purpleheart?

#6

David Barnett

How do you see it if it's ultraviolet? 


Re: Purpleheart?

#7

I planed some for a neighbor...

John in NM

Three 8/4 boards, 8 or 10 feet long. Stuff is horrible heavy and dulls blades pretty quick.

Planed nice though, in spite of the interlocked grain, a lot less tearout than African Mahogany with similar grain.

As Bill notes, it doesn't stay purple long, but the inside of your boxes might. Makes a neat surprise when you open the box :D

Re: Purpleheart?

#8

I have found that it burns

Merle

when I run it through the drum sander, but that is for end grain cutting boards. It sands out with the ROS however.

Re: Purpleheart?

#9

Re: I planed some for a neighbor...

Keith Newton

i made a nice box for my older sister over 30 years ago, which is still purple, but she has no windows in the room where she kept it.

A good friend / customer had a pair of front doors made down in Costa Rica which bled from the pores, and turned a nice teak color within a few months. I have gotten several boards which had the bleeding problem. I would imagine that they were not KD, which would probably take care of that problem.

Re: Purpleheart?

#10

Re: Purpleheart?

Jerry Nicholson

Thanks for the comments information everybody. I think I will try to find some good walnut.

Re: Purpleheart?

#11

craigd

X-ray vision


Re: Purpleheart?

#12

craigd

Re: It doesn't stay purple

craigd

Depends, probably on UV exposure. The planes I posted haven't changed color in years.

The benches are in a store with lots of windows and lots of purple last I looked


Re: Purpleheart?

#13

Re: Purpleheart?

Bill Turpin in WNC mountains

The purplehart that we get in the US is a mixture of about fifteen different species. It is always a mixed bag as to properties.

Re: Purpleheart?

#14

Interesting points Keith...

John in NM

I made my wife a Peroba rosa box 15 years ago, and it faded very quickly. I suspect due to general UV exposure as the inside is still pink. A room with no windows would likely do the trick :D