Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Euro butt II, for the traditionalist among us. *LINK*

Posts

Euro butt II, for the traditionalist among us. *LINK*

#1

Euro butt II, for the traditionalist among us. *LINK*

Keith Newton

For some reason, I had to chuckle, and thought of Bill Tindall, when I ran across this product. Now I wouldn't think Bill would be caught dead using this, but I'm sure there is a market for it out there.

There are times to retain your purity, and then there are other times to make $.

Disclaimer, I have no connection with this company, nor have I ever used this hinge, although I have been using Euro concealed hinges since the late seventies.


http://www.eurobuttsystemshinge.com

Re: Euro butt II, for the traditionalist among us. *LINK*

#2

well, that got me to bite!

Bill Tindall, E.Tn.

"Provides the Elegance of Traditional Hardware".....well, maybe to some. Nothing elegant about a face full of hardware upon opening a door.

Next we will have the European knife hinge option "to provide refinement to a Krenov style cabinet". Bah, Humbug! :)

Re: Euro butt II, for the traditionalist among us. *LINK*

#3

Re: well, that got me to bite!

Thomas S Stockton

Bill

I've seen the Krenov cabinet euro hinge thing done, not a pretty sight. Like anything they have there place but not on fine furniture.

Tom

Re: Euro butt II, for the traditionalist among us. *LINK*

#4

Re: Euro butt II, for the traditionalist among us.

Birdie Miller

I like that catch phrase,... ''Euro butt II, for the traditionalist among us.''

I invented the EuroButt, and the EuroButt II faux traditional hinge.

Like I say at the EuroButt II website. Traditiional design calls for some sort of barrel hinge, fineal tip or ball tip. Because basically in the past there wasn't any other hinge out there.

I invented it because traditional design lokks better with a butt hinge, BUTTTTT, I didn't want to give up the advantages of the high tech concealed hinge. Geeze it took me a few hours just to figure out how to open the thing the first time I saw one in 1976. Then since no one in my area of NJ ever saw one before and no one new what the heck a 35mm drill bit was. It took me and few house to make a router jig to bore the 35mm holes.

I think all in all it took about 6 hours to set 4 hinges in 1976.

Anyway enough fun, check out my EuroButt website to learn out the whole trip.

If you want you can check out my cabinet website. www customcabinetmakers.com I've been cutting wood since 1970, and enjoying it since I started.

Good Luck to all of you.

Birdie Miller

Designer-Craftsman

Inventer of the EuroButt II faux hinge