Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Epoxy void filler

Posts

Epoxy void filler

#1

Epoxy void filler

Barry W. Larson

Hi All:

I am in the process of building a hall bench. I am using slab edged flat sawn white oak. The slabs have a few cracks and voids that I am going to fill with epoxy. I assume that the higher quality West System epoxy is the material of choice. I am planning on colouring the epoxy black - what sort of dye should I use. I seem to recall folks using India Ink to colour epoxy and I assume that this has no effect on the curing of the epoxy. If anybody has any other suggestions they would be most welcome. Thanks in advance for your assistance.

Cheers and Happy New Year to all.

Barry W. Larson

Calgary, Alberta, Canada eh!

Re: Epoxy void filler

#2

Re: Epoxy void filler

Richard McComas

http://www.westsystem.com/ss/adding-pigments-to-epoxy/

Re: Epoxy void filler

#3

Re: Epoxy void filler

Lester Gillett

Barry I am making a enterainment cabinet with white oak. The top had some voids and i used the

2 part Stick Fast Epoxy and Trans-tin dye to fill the voids. It worked out good and i use medium

brown for color. I then put a Medium brown paste wood filler. If it every warms up will spray it

with lacquer. Will post some photos when i git it done.

Lester

Re: Epoxy void filler

#4

Re: Epoxy void filler

don stephan

I often tint epoxy with black fresco powder, both West and inexpensive 5 min epoxies, and have always had good results.

Re: Epoxy void filler

#5

Re: Epoxy void filler

Barry W. Larson

Thanks Richard. Lots of good information in that article.

Barry

Re: Epoxy void filler

#6

Re: Epoxy void filler

Barry W. Larson

Thanks Lester.

Barry

Re: Epoxy void filler

#7

Re: Epoxy void filler

Barry W. Larson

Thanks Don. Where would I find Black Fresco powder? Art store?

Barry

Re: Epoxy void filler

#8

Re: Epoxy void filler

John Lucas

India ink works great in all the epoxy I've tried. I generally just use the 5 minute epoxies in the syringes for small areas. larger areas I use the West System but I buy it buy the quart and it's very expensive. Good stuff but expensive.

One trick I use is to mix the black in so the epoxy is kind of transparent. Then it picks up some of the color of the wood so it's not totally black. Of course if you want it totally black then just add more.

I've also made black epoxy using water based paints, oil based paints, powdered chalk, and powdered tempera paints. Any of these may or may not work with the epoxy you buy so run a test. Every once in a while I get a mixture that will not harden but most will.

Re: Epoxy void filler

#9

Re: Epoxy void filler

Barry W. Larson

Thanks John. I was pretty sure I had read about India Ink somewhere (perhaps even here). This will be the quickest to find since any art store should have this in stock and if I use the 5 minute epoxy I can source that just down the street as well.

Cheers,

Barry

Re: Epoxy void filler

#10

David Barnett

(Message Deleted by Poster)


Re: Epoxy void filler

#11

Re: Three sources

Barry W. Larson

Thanks David.

Barry

Re: Epoxy void filler

#12

Laser Jet Toner


Re: Epoxy void filler

#13

Re: Epoxy void filler

Keith Newton

Barry, if you have a sander with a dust collector bag on it, that dust makes a great filler, which usually comes out a few shades darker than the wood it's from.

When I dump the bags, I try to keep a solo cup of light, medium, and dark up on a shelf to blend whatever color I'm needing.

That of purse is usually added to coloidial silica, which is a really lightweight filler made for thickening epoxy, where you need gap fill, and don't want it to run out before the slow set kicks.

I think adding the wood dust makes a more natural patch than just adding the tint to a clear medium. If you get it right, it will just look like a natural dark streaks the wood.

Re: Epoxy void filler

#14

Re: Epoxy void filler

Bill Howatt

I've used laser printer toner, acrylic hobby paint, sanding dust and used coffee grounds all with 5 minute and "expensive" epoxy. The grounds primarily in wood turnings but it does work in flat things as well. It has an advantage of looking a bit more like a natural part of the wood.

As usual, experiment before you attack the workpiece since determining the amount of additive you want can be tricky - it often seems to look different when mixed than when applied to the workpiece. As mentioned, the sanding dust does come out darker than its original color.

Bill

Re: Epoxy void filler

#15

Re: Laser Jet Toner

Barry W. Larson

Thanks Chad. I hadn't thought of that, but judging from the times I've gotten it on my hands changing a cartridge it should be plenty black!

Barry

Re: Epoxy void filler

#16

Re: Epoxy void filler

Barry W. Larson

Thanks Keith.

Barry

Re: Epoxy void filler

#17

Re: Epoxy void filler

Barry W. Larson

Thanks Bill. The voids I am filling are already surrounded by darker patches, so going a shade or two darker still should look ok. The coffee ground idea sounds interesting, but some of the voids are narrow cracks so the filler needs to be quite fluid to run into the cracks and obviously can't contain any particulate matter that is too large.

Barry

Re: Epoxy void filler

#18

Re: Epoxy void filler one final query

Barry W. Larson

Hi and thanks for all the great replies.

One further question. A few of the voids I am filling are short narrow cracks (like checks) which will likely need something quite fluid to actually get into the opening. Is the West System epoxy more fluid than the 5 minute epoxy. I find the 5 minute variety is fairly viscous and might not work so well in the narrow cracks especially if the tinting material makes it even more viscous.

Thanks in advance once again.

Barry W. Larson

Calgary, Alberta, Canada eh!

Re: Epoxy void filler

#19

David Barnett

(Message Deleted by Poster)


Re: Epoxy void filler

#20

Re: For really thin cracks

Barry W. Larson

Thanks David. I think that might be the answer for the narrow cracks.

Much appreciated.

Barry

Re: Epoxy void filler

#21

Pigments from the paint store...

John in NM

I've used some stuff that has a glycol carrier and will go into epoxy nicely. Bought it at the paint store (Benjamin Moore), probably any real paint store will have something similar. Works in both West System and 5 minute epoxy, just a couple drops is enough. Too much of any liquid colorant will likely effect the epoxy, usually makes it softer and cure time longer.

Re: Epoxy void filler

#22

Re: Pigments from the paint store...

Barry W. Larson

Thanks John.

Barry

Re: Epoxy void filler

#23

Re: Epoxy void filler

Richard Jones

I've used the Behlen's powders with epoxy with pretty good results. You need only add the tiniest amount to get the color, as more powder seems to retard the epoxy setting.

Available here: http://www.highlandwoodworking.com/behlendrypigmentfurniturepowders1oz.aspx

Rich

Re: Epoxy void filler

#24

Re: Epoxy void filler

Barry W. Larson

Thanks Rich.

Barry

Re: Epoxy void filler

#25

Re: Epoxy void filler

don stephan

It was so long ago I can't remember the source, but you might consider getting a kit with common fresco powders. They are great to mix with shellac to add color to putties and other fillers, glue stains, and so on.

Usually I make the filler slightly proud of the surface, and after hard pare with a chisel than bring flush with a card scraper.