Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Bosch 1276 DVS Belt Sander

Posts

Bosch 1276 DVS Belt Sander

#1

Bosch 1276 DVS Belt Sander

Merle

I have had this sander for about 14 years. I got it to flatten the top of my work bench, so I haven't used it very much. The last time I used it was about 4 months ago to flatten an end grain cutting board and it was fine. I wanted to use it again and it does nothing when I pull the trigger. I tried another tool in the same outlet and it worked, so it must be the sander that has a problem. To put it bluntly, I don't know squat about electric motors, but I did blow it out with compressed air to no avail.

Any suggestions about easy things I can try before finding a Bosch service center? Please keep any technical explanations at a first grade mechanical level. :) TIA

Re: Bosch 1276 DVS Belt Sander

#2

Re: Bosch 1276 DVS Belt Sander

Robert Hayward

My guess would be the cord or the switch. Unless you have electric troubleshooting skills you should drop it off at a repair center.

Bob

Re: Bosch 1276 DVS Belt Sander

#3

Re: Bosch 1276 DVS Belt Sander

Merle

Okay, I will save myself the aggravation and give the devil his due. :D Thanks!