Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

re-doing my shop

Posts

re-doing my shop

#1

re-doing my shop

John Lucas

I bought a cabinet saw to replace my contractors saw. I had to completely rearrange the shop to get it in. I'm now building the saw inserts because it only came with one with a very wide throat. I'm also adding a lift up table to the back side of the saw so can saw larger panels by myself. I had to leave the shop for a while due to the contact cement fumes.

I move the bandsaw to the left of my carving bench. I hope that was a good choice. It seems like it might work except for ripping boards over 6 feet long but I rarely do that. I am going to add a larger table to it and see if I can figure out some way to improve it's dust collection.

The thickness sander, planer and jointer will have to be moved to use them but they are all on rollers. The jointer will actually work where it is but will have to be moved to empty the dust collector so the wheels are a good idea. I used the flat refrigerator mover wheels. They work well. I just put a wedge under them when I'm using the machine. I may move the drill press over to the right of the metal lathe since that's where I store all my bits anyway. I'll move the scroll saw over where the drill press was.

I have a lathe hidden in this photo. It's stored behind the big brown cabinet for now and is in the way. I can't move it back until I sell the other table saw and get it out of the shop. So for now the red cabinet and stool with my sanding supplies are just out in the way as well.






Re: re-doing my shop

#2

Can't stay on task

John Lucas

I started out working on blade inserts and building a folding extension table for the saw. I got the inserts done but when I started on the table extension I needed a piece of angle iron. I had some but it needed to be cut shorter. Well my Horizontal bandsaw had been throwing blades and wouldn't work so I decided it was time to solve that problem. Well the machine was really dirty so I ended up taking it down to nothing and rebuilding it. It works great now and I got the angle iron cut. Took about 4 hours to do but that job is behind me now.

So maybe tomorrow I'll get back to work on the table extension. I did manage to sell my other table saw today for the same money I have in this new one. That worked out really well for me.

Re: re-doing my shop

#3

Re: Can't stay on task *LINK*

William Duffield

Paul-Marcel St-Onge (HalfInchShy) provides some good ideas on band saw dust collection in the linked video.


Dust Collection Solutions for your Bandsaw

Re: re-doing my shop

#4

Do not, I repeat, do not

Bruce, a MN Galoot

Feel like the Lone Ranger. We're all guilty of that one.

Re: re-doing my shop

#5

Re: Can't stay on task

John Lucas

Watched your video. GReat job. I sort of combined all of that into one thing on my 14" Delta saw. I think the main problem I'm having is that the gap underneath the table is too large and very hard to block off. I"m going to try to block it better but I think the idea of using magnets to hold the hose to the front and maybe some of the other parts held in with magnets will solve the problem. On the 14" the only way I could see to fill in the spaces would require complete removal to tilt the table. If I use magnets I may be able to simply adjust their fit or simply remove them once the table is tilted. Thanks for the ideas.

Re: re-doing my shop

#6

Sounds like a post from Joanne a few weeks ago.