Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Counter top finish?

Posts

Counter top finish?

#1

JL

Counter top finish?

JL

I'm making a new counter for the box office at the playhouse.

Ideally the finish would be somewhat abrasion resistant.

Ideally it could be easily wiped down.

Ideally it can resist ball point pen dents.

The counter will probably be solid birch - because that's what I have on hand.

Re: Counter top finish?

#2

Here's one option

Merle

http://www.amazon.com/AeroMarine-Clear-Epoxy-Resin-Counter/dp/B0047R0J44

Re: Counter top finish?

#3

Re: Counter top finish?

don stephan

Haven't worked with birch. If it's relaltively soft you might have chipping problems with a brittle hard film finish - the birch could dent underneath so the finish isn't supported. If that's the case, an oil-varnish blend might be an option as it's not a film building finish. I'd suggest some experimenting.

Re: Counter top finish?

#4

Jesper, Denmark

Re: Counter top finish?

Jesper, Denmark

I re-did my kitchen a couple of years ago. Countertops are wood - European beech - and finished with a high-use floor finish in a semi-gloss. This is the type of finish used for basketball floors and similar. It has worked very well.

Re: Counter top finish?

#5

JL

Re: Counter top finish?

JL

Sweet birch runs about as hard as hard maple. Actually, it is harder than white oak.

Re: Counter top finish?

#6

Re: Counter top finish?

Bill Tindall, E.Tn.

Rock, Formica and Corian will resist ball point pen pressure. I doubt if even the moisture cured urethane will.