Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

The problem with finishing

Posts

The problem with finishing

#1

The problem with finishing

Dustmaker Mike

Well I got the heat in over the last few days. So I built a few cabinets to put over the lathes and a few other places. I cut them all out sanded them put them together and then I made the big mistake. I sainted and poly them before I wanted to be finished for the day. So now I sit and watch FB while the poly dries. Maybe I need to make a finishing room off the shop.

Re: The problem with finishing

#2

Re: The problem with finishing

del schisler

i myself i don't use poly for that reason, I use lacquer , a sanding sealer than sand , than 1 coat wait maybe 20 min, and than another coat , than another maybe hr. than if i want i can put 3 coat's of cabnet grade lacquer and i am done, I can do this in a couple hrs, and don't have to worry about dust unless you don't clean much. Than you can carry item's in the garage unless that where you are working. It will all work out mike