Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Re-cycling Solvents?

Posts

Re-cycling Solvents?

#1

Re-cycling Solvents?

tom

When I use MS I will dump in a container to let it settle out then pour off the top portion. Has anyone done this with shelaac thinner/ denatured alcohol?

Re: Re-cycling Solvents?

#2

JL

Re: Re-cycling Solvents?

JL

Depends on what you mean by recycle.

I let all my solvents, thinners, etc. settle out in my glass jars. After they settle and harden, they get poured off into my cleaning jars.

I never use them to thin, I just use them as the initial cleaning solvents for my brushes.

Re: Re-cycling Solvents?

#3

Re: Re-cycling Solvents?

Bill Houghton, Sebastopol, CA

I wouldn't expect shellac to settle out quite the same way; but don't know. I'd say, give it a shot and see what you learn.

Re: Re-cycling Solvents?

#4

Kneale Brownson

Re: Re-cycling Solvents?

Kneale Brownson

We use denatured alcohol to clean up our knitting machines. Let the stuff settle out in glass jars and then run through a filter. Reuse for cleaning. Never use the used stuff for any other purpose.

Re: Re-cycling Solvents?

#5

Re: Re-cycling Solvents?

Dick Coers

You might see some settling with regular shellac, but if it is dewaxed, you are going to wait a long time. I think it will get thicker over time as the denatured evaporates, but will never really settle out.