Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Fiberglassing plywood

Posts

Fiberglassing plywood

#1

Fiberglassing plywood

tom

I am thinking about building some cases for bikes for travel. There is a company that sell aluminum extrusion for building road cases.

I was thinking about using 1/4" plywood, this is what this company uses, but I am considering fiberglass/epoxy to add strenght. What I was wondering is if I do it to just one side will there be a warping problem? Will it be necessary to do both sides, similar to veneering, to keep the panel balanced?

Thanks!

Re: Fiberglassing plywood

#2

Search is your friend

Merle

http://www.woodcentral.com/woodworking/forum/archives.pl/bid/1001/pro/search/pmd/sread/srchid/25311S7q6O27z5MnBSXn1353455631/spage/1/sanc/449288/sbid/1001/md/read/id/449283/sbj/case-for-bike/

Read through the thread. If it doesn't answer the question, you will know the people to contact. HTH

Re: Fiberglassing plywood

#3

Re: Search is your friend

tom

OH BOY! I posted this some time ago. The mind is going!!!!!!!!!!!!

Re: Fiberglassing plywood

#4

Re: Fiberglassing plywood

Bruce, a MN Galoot

TomD on the handtools forum right here on WC has done a significant amount of boat building and fiberglassing and might be exactly who you need to talk to. Unfortunately, he doesn't publish his email address, so I would suggest you post this question on the handtools forum as an OT and go fishing for TomD.

Re: Fiberglassing plywood

#5

Re: Fiberglassing plywood

Jerry Gibbs

I have done a fair amount of fiberglass to plywood in boats. There has not been a problem with glassing just one side and the environment is harsh. The source for epoxy issues is West System. They have extensive tech info free online. Jetty