Federal Card Table
Edward McCormack
Greetings everyone. Its been a long time since i got the opportunity to post anything, been busy with school. Some might remember me, cut off finger, going to North Bennet Street School.
i showed you all the toolbox and tilt top table i had done. At that time i was working on a Chippendale Chair i was asked to post a pic when i finished. never got around to it till now. Gave it to my Mom for mothers day, she loves it.
What I'm working on now is my version of a Federal Card Table, with some interesting woods and design. The apron is resawn Paduke and the legs are Curley Maple with Paduke stringing/bell flowers with a dyed green veneer. The Top is going to be made from two 14" book matched Paduke boards. Here is where i changed the design instead of opening like a traditional card table i wanted to learn to make a rule joint, so it will have a drop leaf with 2 gate legs.




Thanks for viewing and have a safe and happy Thanksgiving
Ed
i have not yet graduated, i will in February. Here is a pic of the bell flowers without the black dot at the top of each. How i made the arc was i used trammel points, and instead of pencil lead i squared off the tip of a nail to match the thickness of the stringing and scratched it in. i also used a scratch-stock and scratched in the stringing.



