Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Plexiglas Chalkboard

Posts

Plexiglas Chalkboard

#1

Plexiglas Chalkboard

don stephan

Want to make some attractive 3' x 2' sidewalk A-frame chalkboard message boards, which our community allows. Considering M&T white oak or cypress frame with chalkboard panel screwed into rear rabbet. 3/16" Plexiglas would seem to be a good panel material for its balance of stiffness and weight. Can anyone suggest how to paint primer on Plexiglas successfully? Thanks.

Re: Plexiglas Chalkboard

#2

Re: Plexiglas Chalkboard

Ralph Lipeles

I've never done it but I would expect that you would want to sand the entire surfac to be painted with maybe 100 grit paper.

Ralph Lipeles

Re: Plexiglas Chalkboard

#3

Re: Plexiglas Chalkboard

Lee Schierer McKean, PA

The big box stores carry a smooth melamine surfaced tempered hard board panel that works great for dry erase markers. It would be a lot easier to make into your stands than trying to paint plexi glass.

Lee

Re: Plexiglas Chalkboard

#4

Re: Plexiglas Chalkboard

Dick Coers

I'd suggest black formica on MDO plywood, and use liquid chalk markers. Those are the kind of materials used in the commercial outside boards.

Re: Plexiglas Chalkboard

#5

Update

Lee Schierer McKean, PA

I was just watching a show ("I Want That")and they had a dry erase paint that can be used over any paint to make a wall into a dry erase board. That paint would allow you to use plain old plywood with your choice of paint colors for your panels.

Lee

Re: Plexiglas Chalkboard

#6

Re: Plexiglas Chalkboard

don stephan

Thanks for the replies. I'm trying to avoid plywood to keep the weight down. When I called a local plastics distributor to ask about Plexi, the salesperson suggested I look into PVC foamboard - some brand names are Gatorfoam, Celtec and Sintra. From what I found on the Internet, they all take paint very well and at least the first two claim some weather resistance. A 3/16" x 4' x 8' panel was quoted at $30. I may try dry erase marker first.