Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

racking

Posts

racking

#1

racking

Joe Vultaggio

I started a project about 6 months ago and had to put it aside for approx 3 months. Now that I've returned to it, I find it's racked!!

It's the top part of a armore, just the frame. It is 40 inches tall and 45 inches wide. How can I strighten it without breaking to wood?

Joe

( I'm not a good speler)

Re: racking

#2

Re: racking

Bill Tindall

While you didn't define the problem I will presume you mean that it is not square. Can you accomplish what you need to do by installing a back to the piece, using the squareness of the back to square the piece?

What joinery did you use. I find that precise joinery leads to self squaring case work.

Re: racking

#3

Re: racking

Joe Vultaggio

I think a back made out of stout wood will do the trick....thanks, Joe

Re: racking

#4

Re: racking

don stephan

If you were planning half or full inset doors, I'd be concerned about the cause of the racking. A stout back will square up the back of the frame, more or less, but the front may still have some out of squareness, making fitting doors more challenging. And if the racking gets worse in a few more months . . .