Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Finishing Recipe??

Posts

Finishing Recipe??

#1

Finishing Recipe??

tom

Anyone have a finishing recipe for hard maple to give it that honey color?

Re: Finishing Recipe??

#2

Re: Finishing Recipe??

Bill Tindall

I have no personal successful experience using wipe on stain. But a professional cabinet shop uses a yellow water soluble dye stain followed by linseed oil to achieve a pleasing effect on their work.

Re: Finishing Recipe??

#3

JL

Re: Finishing Recipe??

JL

Is the yellowing from varnish or oil/polyurethane not enough??

They have a nice golden tone to them.

Re: Finishing Recipe??

#4

Re: Finishing Recipe??

John in NM

I have used lye to good effect on big leaf burl. Went past honey to a very pleasing amber, almost brown. I'm going to try it next week on some hard maple, I would expect similar results but lighter color.

The lye just colors the wood, I follow it with an oil, varnish, or shellac. Stuff I used was a 100% lye drain cleaner from Ace hardware.

Re: Finishing Recipe??

#5

Ellis Walentine

Don't forget to neutralize

Ellis Walentine

You need to rinse off the lye and then neutralize it with a vinegar solution then rinse it again to keep the lye from affecting whatever finish you choose.

Ellis

Re: Finishing Recipe??

#6

Ellis Walentine

Two-stain process

Ellis Walentine

There are lots of formulas for authentic-looking maple finishes. I like to use a dye stain followed by a pigment stain, specifically General Finishes waterbased "Amber" dye stain followed by General Finishes "Candlelight" oil-based pigment stain. The pigment stain deepens the gold tone of the dye stain.

Ellis


Re: Finishing Recipe??

#7

Re: Two-stain process

tom

Ellis,as for the pigmented stain. Is it the Gel or Penetrating?

Thanks

Re: Finishing Recipe??

#8

Always good advice

John in NM

I remember one welding shop I worked for would never neutralize their solution used to get that "nice" rusted finish on steel furniture. Then they'd clear coat with some heavy film product or another, and then they'd get all in a lather over the places the finish would chip after the steel kept rusting underneath.

Re: Finishing Recipe??

#9

Ellis Walentine

The penetrating version


Re: Finishing Recipe??

#10

Re: The penetrating version

tom

Thanks! I am going to pick these products up on Saturday.