Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

OT sort off...Maintenance

Posts

OT sort off...Maintenance

#1

OT sort off...Maintenance

Gary Smyth

In the turning section 11/10, Dennis in Southern Oregon asked about flyers that are also on WoodCentral. Several people responded. Those responses led me to veer in a different question to ask about project management. I ask because when I learned to do my flying my diligence with things that required preparation, maintenance, and attention to detail was heightened exponentially. When woodworking I want my undertaking set up, clean, tuned, and possible obstacles at least considered. I spend a significant amount of time doing it and to be honest, in my view it takes time away from the task of actually working with wood. For me, I know that the importance of preplanning and maintaining stuff while working with wood is a direct result of the other. I’m wondering if other WoodCentral people from different backgrounds develop the same quirk.

Re: OT sort off...Maintenance

#2

Just the opposite for me...

John in NM

Perhaps because I gained a lot of experience quickly in a few professional shops before moving on in other career directions. The planning and anticipation you describe is certainly essential, but it must be kept in proportion to maintain efficiency.

What I found in working at this 40-50 hours a week was that a general outline of project tasks to be done and order of them sped things up a lot, but any more than that slows me down. The other thing I found is that with experience, some of what you describe becomes as automatic as sharpening your tools. The downside to this is that experience can also lead to overconfidence and complacency, and thus errors.