Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Inca Joiner/planer

Posts

Inca Joiner/planer

#1

Inca Joiner/planer

Matthew Bruns

My Dad recently gave me an Inca Joiner/thickness planer.

Upon re-assembling, the gripper drive belt was put on incorrectly and when I started the machine it started to fray the belt. It is made out of some Kevlar type material. I finally got the manual that had intructions on how to install the belt twisted in a bizarre fashion around the pulleys.

Does anyone know where I could obtain a replacement belt as this one is about 1/3 left now?

This belt is a pain to try and install.

Re: Inca Joiner/planer

#2

Re: Inca Jointer/planer

doug f, san clemente, ca

Call Eagle Tools in Los Angeles and talk to Jesse. (323-999-2909 ) He knows as much about INCA tools as anyone around and carries a lot of replacement parts.

Doug

Re: Inca Joiner/planer

#3

Suggestion

Hank Knight

Matthew,

When you get your Inca reassembled correctly, draw a diagram of the belt installation with arrows designating the direction of each twist and which side of the rollers the belt goes on. Keep it with the machine for future reference. You won't remove the belt often enough to remember how it goes back on. The diagram will keep you from having to reinvent the wheel every time you replace the belt.

Also, when you talk to Jesse at Eagle, ask him if he still has the plastic gears that operate the planer feed. They are the weak link in this otherwise wonderful machine. I recommend you order a spare set if they are still available. You will likely need them down the road. Meanwhile, keep the plastic gears on your machine well greased. If they run dry, they get hot and melt (DAMHIKT).

You're going to enjoy your Inca.

Hank