Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

From tragedy to triumph

Posts

From tragedy to triumph

#1

From tragedy to triumph

GregTapler

Random question (with a little back story)…

Recently, hurricane Sandy claimed a tree in our back yard. The tree was my son's tree and duely named ‘Nicholas’ tree’. You can imagine the sadness my wife felt seeing the tree downed.

I have an idea to have a piece of the stump worked into a bench or side table. Can anyone recommend someone local who can do something like this. I really don't know where to go from here.

Peace.

Greg

Re: From tragedy to triumph

#2

Re: From tragedy to triumph

Larry Barrett

Sorry about your loss. Where are you located? Can you provide a little information about the tree? What kind? How large - diameter and length of trunk to the first branches?

Re: From tragedy to triumph

#3

Re: From tragedy to triumph

GregTapler

Thank you for your reply.

I am located in Bethlehem, PA. The tree is/was a Bradford Pear. There is a pile of already cut portions of the tree - the largest being about 14" long and 8" in diameter. The remains of the tree (which is where I would like the piece to be made from) stands about 5 ft high and is about 14" in diameter.

I've attached a picture showing the remains that have yet to be cut down. I'm waiting to cut it so as to not cut is too short in the event a large piece is needed to work.


img

Re: From tragedy to triumph

#4

Ellis Walentine

Lots of craftsmen around here

Ellis Walentine

I live just about 8 miles south of you, Greg. There are plenty of craftspeople around who could make you a fine piece of furniture from your pear log. You will have to have it milled into lumber first, though, and have it dried to a workable moisture content. I would call Mike Peters in Vera Cruz. Get your log cut off as close to the ground as possible and seal both cut ends with Anchorseal or wax or paint. Mike can cut and dry your lumber for you, and while you wait for it to be ready, you can do some prospecting for furnituremakers. Email me at some point and we can discuss your plans. If you are thinking of a bench or table, you'll want to have some of the lumber cut to 1" thickness and some cut to 2" or 3" thickness for legs, depending on the design.

Another thing: Pear is one of the very best turning woods, so I would suggest contacting the Lehigh Valley Woodturners to see if they would like to have some for turning. I wouldn't mind having a couple pieces myself.

Cheers,

Ellis Walentine, Host

WoodCentral.com

Re: From tragedy to triumph

#5

Re: Lots of craftsmen around here

GregTapler

Ellis,

wonderful. Thank you for the information. If you could, would you send me your email address or phone number and we can discuss moving forward. Also, if you could provide me with a contact for Mike, that would be fantastic.

gregorytapler@gmail.com

Greg