Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Update on my table saw

Posts

Update on my table saw

#1

Update on my table saw

abcd_43130

About a week ago I posted that I was having problems with my table saw. It was an old 103 craftsman. Before it hit top speed it would bog down and the belt would wobble a little or slip. It would keep running, but would not hit top speed and therefore not have the power to cut wood. You all were great at suggesting things to look at. I looked at the belt, bearings, motor brushes. I went to look at repairing the motor and the cost was more than i was willing to pay. I found on craigslist an old 113 craftsman (a newer model for me, ha). He was asking $50. Came with the fence and guide. I asked if that was his lowest price and he said yes, but he will throw in an old craftsman 4" jointer. Once he saw I was a rotarian he also threw in a nice dado blade. I really lucked out.

Well, I went home and hooked it up...SAME PROBLEM. Not once did I think it was the strength of the electricity I had out in my shed. I unplugged everything (music, lights) and plugged the saw directly into the extension cord running from the house. It worked just fine. I found it amusing, wish my wife did too :(

Chris

Re: Update on my table saw

#2

Dr Chris Miller? 


Re: Update on my table saw

#3

Re: Update on my table saw

del schisler

i guess we didn't have all the fact's, I guess most didn't think of extension cord I guess most thought that you would have a good power from the outlet ?? Never run a saw on a extention cord like a 100 foot, I never run one eather way but i guess if building a house you dont have a choice ? pugged the saw directly into the extension cord running from the house. It worked just fine Now you have 2 saw's that work, Put in a good power sorce now.

Re: Update on my table saw

#4

Re: Update on my table saw

abcd_43130

George,

I am Dr. Chris Miller. I am a retired high school teacher. While teaching I earned a masters and a doctorate. Shortly after earning my doctorate I became very ill and retired with only 21 years of teaching.

I didn't bother to mention the electric because I didn't realize it would affect the equipment the way it did. I just assumeed the breaker would flip if it tried to draw too much electricity.

Chris

Re: Update on my table saw

#5

Wow!... You need a heavier cord...

John in NM

I would have expected the breaker to trip as well, or the cord you're using to become hot enough to get your attention :D

How long is the run? More than 50' and you can start to see an appreciable voltage drop, especially when using light duty cords. If the run is more than 50' you probably need a 12 AWG cord at least. One long cord is also better than two shorter ones, the plugs add impedance to the circuit - at least I figure that is why they are the part that melts first :D

Re: Update on my table saw

#6

Re: Update on my table saw

abcd_43130

I ran my 12 gauge 100' extension cord out to the shed and everything is working well :)

Thanks,

Chris