Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Small Biz Idea

Posts

Small Biz Idea

#1

Small Biz Idea

tom

I would appreciate your input about an idea that I have had for some time. I presently have a shop that is fully equipped. My idea was to offer a "Cut to Size" to people who do crafts, small remoldel project where they may need material sized but they do not have the means or equipment to do it. Also people whp may want a sheet of plywood cut into a number of individually sized pieces.

So tell me what you think.

Thanks!

Re: Small Biz Idea

#2

Re: Small Biz Idea

John McGaw (Bodger)

Isn't that a free service offered by the big-box home centers? I've certainly had them cut up sheetgoods for me to make handling easier. For smaller pieces I'm not sure what the situation is.

Re: Small Biz Idea

#3

Re: Small Biz Idea

doug f, san clemente, ca

Tom - I think you've got a good idea going. The big boxes do it, but not very precisely and not very cheap.

If you do precise work, this would be a godsend to a lot of small crafters.

The only drawback would be pricing your work; per piece, per hour, flat rate, minimum charge, all that business stuff. You're not going to get rich, but it would certainly pay for a few toys, eh... tools, and would be an opportunity meeting a lot of other woodworkers..

Good Luck.

Doug

Re: Small Biz Idea

#4

Re: Small Biz Idea

Carol

Have you identified your potential customers in your area? And do you know how to let them know what you plan to offer?

There was a company in the upper Midwest a few years ago that was willing to cut parts for specific plans and sell them by mail order. They are no longer in business and they did enough advertizing for me, who had no interest, to take note of what they offered.

Just sayin'......

Re: Small Biz Idea

#5

Re: Small Biz Idea

Dick Coers

I'd say tolerances would be a problem. I've never cut a bunch of parts and then assembled them. I cut, test, and assemble as I go. Sooner or latter, with a whole stack of parts, something is going to come up short or long. Tough business plan I would say.

Re: Small Biz Idea

#6

Re: Small Biz Idea

Jesse Cloud

Tom.

I think you might be on to something. I hate trying to get something cut at the big boxes, their saws are broke more often than not and the don't have a clue how to cut accurately.

Also I know a lot of people who are trying to get by without a jointer or planer, and without a pickup or other way to get the material from the lumber yard to their garage.

As others have said, the key is finding your customers at a low cost.

This might be very workable if you have the equipment in house for another revenue generating process and this is a sideline - might not work if this is how you would make a living...

Re: Small Biz Idea

#7

Re: Small Biz Idea

mkula

Speaking as someone who has been in the situation of not always having had the tools I needed at the right time, I'd say, yeah there is a market for this. I echo the post above that I dont think anyone would get rich from it, but there have been times I wished I had this service. The two specific cases I can think of-- which I think would help your business odds-- would be planing and jointing wider stock. There were times I got by without either tool, and there are plenty of people out there with 6 inch jointers and 12/13 inch planers. I bought some rough sawn stock that was extra wide and had to seek out someone to plane for me. If you have 8inch jointer and 15+ inch shop planer that might help the odds of foot traffic. One place to start would be by networking with local mills in your area who sell rough stock. They'd probably appreciate an outlet they could steer customers to. just a thought. good luck.

Re: Small Biz Idea

#8

I think you're on to something

Howard in Toronto

I wouldn't think you'll be able to quit your job to do this full time, but if you promote it appropriately, you might be able to make your cable bill pretty regularly.

I'd let woodworking stores, lumberyards and craft stores know what you want to do. Ask them to put up fliers in the store and be included in their newsletter or just a separate letter to their biggest customers.

Define your version of success (see the first paragraph) and invest a little bit of money to promote yourself while you uncover new ways to do so too.

Good luck. And please keep us posted on your success.

Howard