Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Finish for stair treads - when and which type?

Posts

Finish for stair treads - when and which type?

#1

JL

Finish for stair treads - when and which type?

JL

I'm going to be redoing the stair treads in my house. They will be pine. I'm going to stain them.

I'll be staining them before installation. That got me to thinking - should I finish them before installing them?

I was figuring on a polyurethane finish. Should I use gloss, semi-gloss or satin?

Re: Finish for stair treads - when and which type?

#2

Re: Finish for stair treads - when and which type?

Phil lieberman

I would go with Varathane semi-gloss or satin (Oil) because gloss will show any wear/imperfection fast .I just flipped a "Condo" after redoing the building and i refinished the flooring and used this product and when i redo my Oak flooring in my house i will use it. it costs more than the rest. I think its says on the can for High traffic finish

Re: Finish for stair treads - when and which type?

#3

Re: Finish for stair treads - when and which type?

Keith Newton

I wouldn't do gloss either. And a nice touch, is to mask off about a 2" strip, back about 1" from the nose. You can get some non-skid powder which you sprinkle into a wet coat of finish, or epoxy, which helps with traction, especially with sock feet, or wet shoes. It doesn't hurt the aesthetic appearance either.

Re: Finish for stair treads - when and which type?

#4

Any reason for pine?

Howard Acheson

Pine is a very soft wood and does not stand up well on stair treads generally.

Re: Finish for stair treads - when and which type?

#5

JL

Re: Any reason for pine?

JL

The rest of our flooring is pine.

Pine is also much less expensive.

Re: Finish for stair treads - when and which type?

#6

Ellis Walentine

... and, being in Alabama...

Ellis Walentine

... you're probably talking about southern yellow pine, which is considerably harder than white pine and western pines. Just guessing...

Re: Finish for stair treads - when and which type?

#7

Re: ... and, being in Alabama...

Bruce, a MN Galoot

And I'll bet that quartered SYP would outlast all of us.

Re: Finish for stair treads - when and which type?

#8

JL

North GA actually

JL

and yes, it is SYP.

I got several 16' sticks of fairly clear 5/4 treading. Took me a day to sand all of the upper surfaces before staining. Also many pieces of sandpaper.

Re: Finish for stair treads - when and which type?

#9

Re: North GA actually

William Duffield

For sure, there's nothing wrong with SYP stair treads. However, poly may not be your best choice for a finish, only because of its long term repairability issues. You might want to consider Waterlox instead. It might not be quite as tough as poly, but when it finally needs to be renewed, it's a lot easier to apply a new coat.

Yeah, poly is cheaper, and tough enough, but if it's your own home, you have to consider the maintenance costs over time.