Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

treated wood

Posts

treated wood

#1

treated wood

eliot d

I have a lot of that treated pine that 's used for decks, walkways, etc. I was thinking of using it now and then for jigs and stuff-- nothing special. But I'm worried about chemicals or whatever. What's in it anyhow? Should I just throw it out? I cut a few pieces yesterday, and it just looks and smells like ordinary pine to me. What's the story?

Re: treated wood

#2

Re: treated wood

Bill Howatt

Several years ago the treatment included arsenic but that has been replaced with a different forumlation with copper, chrome and something else which is supposed to be a lot safer since there is no arsenic.

If you Google you can find lots of info and not surprisingly, some conflicting.

Now there is a difference in walking on, playing on and holding the wood compared to other activities such as cutting, planing and drilling. In these operations very fine dust particles can be produced and some will end up in your lungs. For this reason, I cut it all outside and try to wear some form of dust protection. I dread having to rip any in my shop and avoid it if I can.

I have had people say they experienced a chemical taste in their mouth after handling the wood a lot with their bare hands. I had that happen when using the liquid that is put on fresh end-grain cuts.

So I wouldn't be using it where I had to work it in any manner. I also don't consider myself a eco-nut or nervous-nellie but I would sooner avoid this stuff for any application that doesn't benefit from the rot resisting treatment.

Bill

Re: treated wood

#3

Re: treated wood

eliot d

Sounds like an intelligent answer. Now I'm beginning to think about the workmen who spent days cutting this stuff and working with it to make a deck for me. At least they were outside, but they certainly were not wearing masks. I wonder what OSHA has to say about it.

Re: treated wood

#4

Re: treated wood

Barry Irby

Unless you have had it for about ten years or more, and if its green, its probably treated with ACQ (Alkaline Copper Quaternary). This is the "new" stuff and is supposed to be less harmful to humans, but is very corrosive to metal. this is what brought out the whole generation of special deck fasteners. Google ACQ and you will get more info than you want.

There is another chemical based on Borates that is less corrosive, but it was not stable in the wood in the presence of water, so was not suitable for exterior use. Someone has figured out how to make it suitable for decks. It darkens the wood slightly. Home Depot carried it for a while. Not as corrosive.

I would not want to use any more of it than necessary in my shop because I am concerned about corroding tops etc, and the health issues.

Re: treated wood

#5

It mages good bird houses

Lee Schierer McKean, PA

It makes pretty nice birdhouse material.

I wouldn't use it for jigs.

Lee

Re: treated wood

#6

Re: It makes poisonous bird houses

William Duffield

There's no way I would take a chance on making my birds sick by using pressure treated lumber. (I wouldn't use cocobolo either.)

Re: treated wood

#7

Re: treated wood

Howard Acheson

Treated wood and/or sawdust from treated wood will stain your cast iron surfaces. Using it for jigs is not a good idea.

Re: treated wood

#8

How about cypress or redwood?

Henry Higginbotham

I've got some scraps of both woods in sizes suitable for bird houses and not much else. The redwood is old and came from one end of a house that mostly burned. The cypress is fence material scraps, and I'd wondered about the oily nature of it.

I wouldn't think either would harm birds. Rather, my concern is that birds might shun smoky or oily wood.

Re: treated wood

#9

Re: How about cypress or redwood?

Bill Tindall

I have two dozen cypress nesting boxes in use and have seen no reluctance of the target species to use them.

Re: treated wood

#10

Re: treated wood is dangerous

Bruce McCrory

As a landscape architect I have specified and researched outdoor woods and materials for over 30 years. That's long enough to observe the life cycle of most of my projects. The solutions for material to use always have pro' and 'con attributes.

Avoid using treated wood for anything but exterior construction. The dust and contact with the wood is dangerous--think smoking tobacco, on steroids. Don't burn it--the fumes are extremely toxic. The chemicals will 'rot' through most fasteners in a few years. Toxicity is never something to be casual about. I love the smell of Western Red Cedar, but need breathing protection when working with it; and, must shower immediately after a session.

Things that are extremely frustrating about treated wood is the lack of waste disposal; and 'government' notions that natural preservative woods, e.g., cedar, cypress, redwood, need to be used instead. Trouble is those woods deteriorate faster than they can be replaced with new stock. They are not "sustainable".

Heat treated lumber is showing great promise as a non-toxic alternative.