Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

What's it????

Posts

What's it????

#1

What's it????

Barry Irby

A friend gave me some pieces of tools that had been abandoned in storage. One piece is a miter gauge that has a bar on it that is about thirty inches long with a sliding stop. The miter part is not terribly sophisticated. Instead of a rail or bar to slide in the slot on a table there are two plastic (?) studs that stick down on the bottom and they appear to have threaded steel inserts. Cast into the miter gauge part is the word FESTO. Anybody know what it is and how much of it is missing or is it an attachment for something else?

Re: What's it????

#3

i did a google search    see text

del schisler

http://www.google.com/#sclient=psy-ab&hl=en&q=festo&oq=+FESTO&gs_l=hp.1.1.0l4.0.0.1.12130.0.0.0.0.0.0.0.0..0.0.les%3B..0.0...1c.kQknLcwasGI&pbx=1&bav=on.2,or.r_gc.r_pw.&fp=cff65b91869e542e&bpcl=35466521&biw=970&bih=542

Re: What's it????

#4

Re: What's it????

Jesse Cloud

A picture would be worth a thousand words, but the Festo company is the root of the current Festool line along with a few other industries, including the automation/robotics company that still uses the Festo name.

Many Festools currently marketed have parts that are labelled Festo. The miter gauge probably comes from one of them. Maybe with a picture we can nail it.

Re: What's it????

#5

Sounds like a...

Don Orr

...Flangen interupted Commutizer with the Stinder adjuster.

Re: What's it????

#6

OK, some Pics

Barry Irby


This is the front or top side. The bar is about 32" long, extending out of frame to the left.



This is the bottom or back.

While we are at it, here is some sort of ARC tool or trammel I got from the same friend. the two pieces clearly hook together and make them about two feet long. the numbered part can slide in and out to adjust the radius of the arc. The stylized letters on it say PNI, Wilmington, NC Any idea ho much of this I am missing?


Re: What's it????

#7

Oops, here is the back.....

Barry Irby


I don't understand what would attach to the two "studs" on the back.

Re: What's it????

#8

Re: OK, some Pics *LINK*

Dick Coers

Looks a lot like the miter gauge head for a sliding table something. Here's a link to something close. Scroll down the page and click on the pic.


Festool CMS router table

Re: What's it????

#9

Re: What's it????

Jesse Cloud

The Festo piece with the 32 inch rod goes on an earlier version of the Festool MultiFunctionTable (MFT). The bar is used as a fence that you put the workpiece against. The 90 degree thingy allows you to move the fence to an angle. You can use this with a saw or router to make an angled cut.

The angle unit used on the miter gauge for the CMS in the wood whisperer video is a slightly updated version of the piece.

I have an angle unit and fence on my MFT just like it.

I have no idea what the ARC thingy is...

Re: What's it????

#10

Re: What's it????

Ray Newman

This may help, RE Festoo & FE$TOOL:

"Festo was founded in 1925 by Gottlieb Stoll and Albert Fezer. Initially it manufactured wood cutting tools and later diversified into the automation industry. In 2000 its portable power tool activities were spun off into an independent company, Festool...."

Read all 'bout it:

http://en.wikipedia.org/wiki/Festo

Re: What's it????

#11

I was wrong...

Don Orr

That's the Franseen Immulation module with a VonSonnenberg triangulation extension. Pretty rare find you have there. ;) :D :b