Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

electrical switch question

Posts

electrical switch question

#1

electrical switch question

Jerry Gibbs

I am re-using a furnace blower. The motor has 4 wires which I have tested. The wires are a common and 3 different speeds. I would like to keep the 3 speed feature with a rotary switch. What kind of switch am I looking for. I find lots of variable speed switches with 2 wires and voltage control. I don't know the amperage of the motor (the plate may be hidden), but the furnace operated on a 15 amp circuit. Also where is the best place to look. Part of the game it to re-use this blower at minimum cost. Jerry

Re: electrical switch question

#2

Re: electrical switch question

Bill Houghton, Sebastopol, CA

The variable speed switches you're finding probably use a rheostat that adjusts current continuously, and wouldn't work for your application. If your local Grainger outlet will talk to you (it's officially a wholesale/contractor's place, but some counter people will talk to non-contractors), tell them what you want. Otherwise, check around at your local pro-grade electrical supply shops, or HVAC supply shops. You want a switch that feeds from one common to several outputs; not sure what the technical name is, but if you explain it to a competent counter person, s/he'll know.

Re: electrical switch question

#3

3 speed rotary switch

del schisler

check here http://www.google.com/#hl=en&sugexp=les%3B&gs_nf=3&cp=11&gs_id=1c&xhr=t&q=3+speed+rotary+fan+switch&pf=p&sclient=psy-ab&site=&source=hp&oq=3+speed+rot&gs_l=&pbx=1&bav=on.2,or.r_gc.r_pw.&fp=df8ce7d8506037c&bpcl=35466521&biw=973&bih=542

Re: electrical switch question

#4

Re: electrical switch question

Bill Howatt

Don't know what you are going to do with it but I use a couple in shop-made air filters. For that application you only need the fastest and the slowest - the middle speed isn't different enough to make much of a difference.

To do the switching I just used a regular 3-way light switch which is a single-pole, double-throw. Hot to the common and the high wire to one terminal and the slow wire to the other terminal.

If this isn't what you want to do, just ignore me.

Bill

Re: electrical switch question

#5

makes sense


Re: electrical switch question

#6

Just check the current draw

del schisler

see if the switch can do that much current draw for that motor, most of the like 3 speed switch's like in a fan i don't belive they can do the motot, but check the motor current draw. if so you can get them at the box store's for not much money