Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Euro Hinge Help Needed

Posts

Euro Hinge Help Needed

#1

Euro Hinge Help Needed

Thomas Skaggs, Foothills of Mount Level

So I have a project coming up. I am removing all the existing cabinet doors and drawer fronts in our kitchen. The cabinet boxes and face frames are fine and will remain.

I want the new doors to look more contemporary with less reveal of the face frame. So they will be overlay doors, larger than the current doors. That means they will overlay the face frames more. The overlay might be 1"+ in some cases.

Does anyone know of a good adjustable Euro Hinge that works for larger overlay doors?

Thanks for any help!

T.

Re: Euro Hinge Help Needed

#2

Ellis Walentine

Short answer: no.

Ellis Walentine

Hi Tommy,

I checked with my old partner who is still making cabinets, and he didn't know of anything like what you're looking for. I'm wondering if the face frames are flush with the inside walls of the cabinet or if they overhang the box opening? If they overhang, you could notch them out and use regular overlay hinges. It wouldn't be the greatest look with the doors open, but it might work.

I also recall back in the very old days (~1980), doing a job where we used these inexpensive double-jointed hinges that were invisible and had quite a throw. I remember getting them from Selby in New York. If they still sell them, it might be worth investigating.

Sorry, not much help.

Ellis

Re: Euro Hinge Help Needed

#3

Re: Euro Hinge Help Needed

Keith Newton

There are some, or maybe once were, which were not much more than the cup, with about 1" of arm, which would slip into a little face mounted clip, which could be screwed onto the face anywhere.

Sorry I don't have a brand or number, but when I quit face frame back in the mid eighties, I haven't had much experience with FF since then.

I think I can find a few back in my bins, that I could photograph for you, if someone else doesn't step up with help.

Re: Euro Hinge Help Needed

#4

Re: Euro Hinge Help Needed

Thomas Skaggs, Foothills of Mount Level

Thanks Keith. I recall seeing a hinge like that but it's been a while. Hopefully I can find a hinge that works so I don't have to modify the design.

Tom

Re: Euro Hinge Help Needed

#5

Mark Mandell is "Da Man"!

Thomas Skaggs, Foothills of Mount Level

Just heard from Mark. He found the hinge for me! Most excellent. We have some very helpful and fine folks here.

T.

Re: Euro Hinge Help Needed

#6

Bob

Re: Short answer: no.

Bob

Ellis I thought you were one of the old timers, your just a young whippersnapper. 1980 is not so long ago, I had my first job building gas stations in 1960.