Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

hearing protection question

Posts

hearing protection question

#1

hearing protection question

Jerry Gibbs

Just got hearing aids, so I need ear muff type protection. Looking at my borg, they had muffs rated at 20 and 30 dB. I'm not sure more is better. I want to hear my machines running. I have a problem now with the dust collector drowning out the table saw and having to make sure the saw is off. Any real difference between the 2 muffs? As a side issue, do any of you install lights on machines to indicate they are running and how so? Thanks. Jerry

Re: hearing protection question

#2

Re: hearing protection question

JMOHNIKE

Jerry 2-3 yrs ago I purchased an eletronic set from Harbor Freight. When there is noise they turn on and block the sound. When no noise they turn off and you can hear, sounds like a cheap radio. If you can not hear, then some thing is on or your battery is dead, but they do work and not that much $$.

Re: hearing protection question

#3

Re: hearing protection question

doug f, san clemente, ca

Jerry - I got these about 6 months ago for travel use, but I discovered they work quite well in the shop also.

http://www.amazon.com/gp/product/B0031RG832/ref=oh_details_o04_s00_i01

Doug

Re: hearing protection question

#4

Re: hearing protection question

Larry Clinton At Frankfort, (Central) Indiana

Jerry, in addition to my Wood shop, I do a lot of target shooting. Haven't bought them yet but I am going to purchase a set of Electronic Earmuffs. I am a little hard of hearing too and some of these amplify normal sounds in addition to shutting down excessive loud noises - They range in cost from less than $20 to way up there. I probably am going to buy a mid-range cost set - around $50 - $60. Most are bought by gun enthusiasts, might want to read some reviews on Amazon. http://www.amazon.com/s/ref=a9_sc_1?rh=i%3Aaps%2Ck%3Aelectronic+earmuffs&keywords=electronic+earmuffs&ie=UTF8&qid=1349899143

Re: hearing protection question

#5

Re: hearing protection question

Bill Houghton, Sebastopol, CA

My current best ear muffs are 29 db; I can hear machines running, with light middle-age hearing loss (no aids yet).