Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Question on building a stringing sizer

Posts

Question on building a stringing sizer

#1

Question on building a stringing sizer

Bill Tindall

I am not inclined to pay LN a fortune for a stringing sizer. Does anyone have a picture of one that is readily made and works well? Specifically, I need advice on how to make the cutter adjustable, ie the adjusting mechanism/blade attachment.

Re: Question on building a stringing sizer

#2

Re: Question on building a stringing sizer

Jesse Cloud

I found the LN sizer awkward to work with. Much too easy to break the string, and it always broke just as it was getting to the right size. Sold the sizer and never looked back.

These days I take the string blanks to the drum sander and get them really close. After I cut the string, if its a little thick for the groove, a couple of passes with a sanding block do the trick. Much faster and no breakage.