Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Lacquer/stain removal

Posts

Lacquer/stain removal

#1

Lacquer/stain removal

Jerrid Edgington

I am refinishing some furniture for a co-worker and I am doing the head and foot board at this time. There are several very small grooves in the posts that I can't seem to get properly sanded before I stain it. Is there any type of lacquer/stain removal chemicals that I can use to make my job a little easier ?

Re: Lacquer/stain removal

#2

Re: Lacquer/stain removal

Merle

You might be able to use a riffler to completely remove the old finish. The link is one example that provided a good picture. If you Google them you will find less expensive brands.

http://www.leevalley.com/US/wood/page.aspx?p=53809&cat=1,42524,53823,53809

Re: Lacquer/stain removal

#3

Re: Lacquer/stain removal

Dick Coers

If it's a hard wood, lacquer thinner and a soft brass brush.

Re: Lacquer/stain removal

#4

Re: Lacquer/stain removal

Jerrid Edgington

It is. Will this also take off the stain in those areas I can't get sand papered or do I need something else for that ?

Re: Lacquer/stain removal

#5

JL

Re: Lacquer/stain removal

JL

It depends on the finish and the wood. You neglected to mention the type of wood. If it is a very porous wood - such as red oak - you may not be lucky. If it is not a porous wood, you can try a stripper (methylene chloride or other), followed by a brass bristled or plastic brush, followed by a suitable thinner.

Another thought is to use abrasive pads. You can scrub off the finish with a wet coarse pad and follow it up with a finer pad.

Re: Lacquer/stain removal

#6

Re: Lacquer/stain removal

Jerry Roberts

Ill tell you what I dida couple years ago on an old rocker.It had so many nooks and crannies I couldnt get the remover to adhere or remove it. Some peopleprobally wont agree but I used acetone. Only problem was it eveporated so quickly I had to use a lot but it worked great. Stripped it with acetone, made my own wipe on poly and it looks great today

Re: Lacquer/stain removal

#7

Re: Lacquer/stain removal

Jerry Roberts

Oh, sorry. I did use 4-0 steel wool to quickly wipe everything down. The lacquer or varnish came off easily.